reset to default

config

@@ -1,16 +1,80 @@
-#Config file for Pat Menu
-#20200429 KM4ACK
-MYCALLSIGN=KM4ACK
-MAP=usa
-RIGCONTROL=yes
-ARDOP="/home/pi/ardop/./piardopc 8515 plughw:1,0 plughw:1,0"
-ARDOPGUI="/home/pi/ardop/./piARDOP_GUI"
+#20191230 KM4ACK
+
+#This setup is designed to work with a VOX soundcard (ie Signalink)
+#If using a VOX soundcard or radio with a VOX soundcard built in
+#simply edit the call sign below to yours and change 
+#RIGCONTROL=no to RIGCONTROL=yes below.
+#Now test the setup. Be sure you have FLRIG open
+#and configured for your radio.
+#AMRRON operators see bottom of this file for trimode.
+
+
+#change next line to your call sign
+MYCALLSIGN=N0CALL
+
+#enter your piardopc command on the line below
+#Be sure to not delete the quotation marks.
+ARDOP="$HOME/ardop/./piardopc 8515 plughw:1,0 plughw:1,0"
+
+#Path to ardop-gui if installed
+ARDOPGUI=$HOME/ardop/./piARDOP_GUI
+
+#command to start direwolf
 DIREWOLF="direwolf -p"
+
+#Kiss attach command
 KISS="sudo /usr/sbin/kissattach /tmp/kisstnc"
+
+#axport name for kissattach
 AXP=wl2k
+
+#Set map to use with findardop
+MAP=usa
+#MAP=world
+
+#Use rig control? yes or no 
+#NOTE: autopat will not work without rig control
+RIGCONTROL=no
+
+#enter your rig control command below. DO NOT enter mode
+#or frequency commands as these are handled by the script
+#Be sure to not delete the quotation marks. DO NOT use
+#"rigctld" here. Use "rigctl"
+#example for Yaesu 857D
+#RIG="/usr/local/bin/rigctl -m 122 -r /dev/ttyUSB0 -s 4800"
+
+#Pass rig control commands through FLRIG (default)
 RIG="/usr/local/bin/rigctl -m 4"
-MODEHF=PKTUSB
+
+#Mode used for HF digital comms on your radio
+MODEHF=USB
+
+#Mode used for packet digital comms on your radio
 MODE2M=FM
-PORT=5050
-LOG=/home/pi/Documents/mylog.txt
+
+#port number used by pat html service
+#pat default is 8080. I prefer 5000
+PORT=8080
+
+#Path to log file
+LOG=$HOME/Documents/mylog.txt
+
+#Below this line is only useful to AMRRON operators. Others shouldn't edit below this line.
+#NOTE:The amrron portion of this script is still experimental.
+
+#set next line to yes for tri-mode setup
 AMRRON=no
+
+#amrron operaters should save/exit this config file after setting above to yes and then run
+# bash ~/patmenu/trimode 
+#to enable trimode ops
+
+
+
+
+
+
+
+
+
+