diff --git a/default.config b/default.config
index 1c8cf2d..646e261 100755
--- a/default.config
+++ b/default.config
@@ -1,80 +1,18 @@
-#20191230 KM4ACK
-
-#This setup is designed to work with a VOX soundcard (ie Signalink)
-#If using a VOX soundcard or radio with a VOX soundcard built in
-#simply edit the call sign below to yours and change 
-#RIGCONTROL=no to RIGCONTROL=yes below.
-#Now test the setup. Be sure you have FLRIG open
-#and configured for your radio.
-#AMRRON operators see bottom of this file for trimode.
-
-
-#change next line to your call sign
+#Config file for Pat Menu
+#20200429 KM4ACK
 MYCALLSIGN=N0CALL
-
-#enter your piardopc command on the line below
-#Be sure to not delete the quotation marks.
-ARDOP="$HOME/ardop/./piardopc 8515 plughw:1,0 plughw:1,0"
-
-#Path to ardop-gui if installed
-ARDOPGUI=$HOME/ardop/./piARDOP_GUI
-
-#command to start direwolf
-DIREWOLF="direwolf -p"
-
-#Kiss attach command
-KISS="sudo /usr/sbin/kissattach /tmp/kisstnc"
-
-#axport name for kissattach
-AXP=wl2k
-
-#Set map to use with findardop
 MAP=usa
-#MAP=world
-
-#Use rig control? yes or no 
-#NOTE: autopat will not work without rig control
 RIGCONTROL=no
-
-#enter your rig control command below. DO NOT enter mode
-#or frequency commands as these are handled by the script
-#Be sure to not delete the quotation marks. DO NOT use
-#"rigctld" here. Use "rigctl"
-#example for Yaesu 857D
-#RIG="/usr/local/bin/rigctl -m 122 -r /dev/ttyUSB0 -s 4800"
-
-#Pass rig control commands through FLRIG (default)
+ARDOP="/usr/local/bin/ardopc64 8515 plughw:3,0 plughw:3,0"
+ARDOPGUI="/home/km4ack/ardop/./piARDOP_GUI"
+DIREWOLF="direwolf -p"
+KISS="sudo /usr/sbin/kissattach /tmp/kisstnc"
+AXP=wl2k
 RIG="/usr/local/bin/rigctl -m 4"
-
-#Mode used for HF digital comms on your radio
 MODEHF=USB
-
-#Mode used for packet digital comms on your radio
 MODE2M=FM
-
-#port number used by pat html service
-#pat default is 8080. I prefer 5000
 PORT=8080
-
-#Path to log file
-LOG=$HOME/Documents/mylog.txt
-
-#Below this line is only useful to AMRRON operators. Others shouldn't edit below this line.
-#NOTE:The amrron portion of this script is still experimental.
-
-#set next line to yes for tri-mode setup
+LOG=/home/km4ack/Documents/mylog.txt
 AMRRON=no
-
-#amrron operaters should save/exit this config file after setting above to yes and then run
-# bash ~/patmenu/trimode 
-#to enable trimode ops
-
-
-
-
-
-
-
-
-
-
+WARN=no
+WARNMSG=""