mirror of
https://github.com/AG7GN/nexus-utilities.git
synced 2025-05-20 00:10:11 -07:00
209 lines
7.8 KiB
Plaintext
209 lines
7.8 KiB
Plaintext
# Configuration file for the tnc.sh script. Place this file in your home directory.
|
||
|
||
# BEGINNING OF USER CONFIGURATION SECTION ########################################################
|
||
|
||
# These MUST be changed before starting the script!
|
||
|
||
#-------------- Direwolf Parameters --------------------------------------------
|
||
# You may use a tactical call sign for MYCALL for APRS. If you do, you MUST set a valid call sign
|
||
# in COMMENTCALL so that a call sign is included in the APRS text. Otherwise, COMMENTCALL
|
||
# may be left empty.
|
||
MYCALL="N0CALL-10"
|
||
COMMENTCALL=""
|
||
LOC="Bellingham, WA"
|
||
GRID="CN88ss"
|
||
|
||
# Direwolf supports both decimal degrees (e.g. -71.34717) format using the "."
|
||
# character (and negative values) as well as the degrees.minutes.seconds (e.g. 71^20.83W)
|
||
# format using the "^" character (and the E/W indicator)
|
||
LAT="48.753318"
|
||
LONG="-122.472632"
|
||
|
||
# Rig power in watts
|
||
POWER=10
|
||
# Antenna height in feet from average terrain (not feet above sea level)
|
||
HEIGHT=40
|
||
# Antenna gain in dBi
|
||
GAIN=2
|
||
|
||
# Direwolf Audio sample rate in bits/second. Depends on your soundcard - usually 44100 or 48000.
|
||
# Fe-Pi and DRAWS audio cards can use 96000:
|
||
ARATE="96000"
|
||
# Signalink:
|
||
#ARATE="48000"
|
||
|
||
#--------------- Direwolf Sound Card, PTT and rig control settings --------------------------------------------
|
||
|
||
# There are 2 ways to select the sound card. The first way is to explicitly select the
|
||
# card by assigning it to the AUDIO_DEV variable below:
|
||
#AUDIO_DEV=""
|
||
AUDIO_DEV="fepi-capture-right fepi-playback-right"
|
||
|
||
# The second way is to set the following variable, which this script will use as a
|
||
# case-insensitive string to grep for (uniquely identify) the soundcard in "arecord -l"
|
||
# output. Typically, "USB AUDIO" works for USB sound cards like Signalink.
|
||
# For Fe-Pi sound card, use "Fe-Pi".
|
||
AUDIO_DEV_SEARCH_STRING="Fe-Pi"
|
||
|
||
# If you set AUDIO_DEV="", then AUDIO_DEV_SEARCH_STRING will be used to find the audio card.
|
||
# Set AUDIO_DEV if you want to use a virtual sound card. AUDIO_DEV_SEARCH_STRING is ignored
|
||
# if AUDIO_DEV is set.
|
||
|
||
# PTT Options and Examples:
|
||
# 1. The sound card handles PTT via VOX (e.g. SignalLink), so set to empty string.
|
||
# PTT0=""
|
||
# 2. Use General Purpose I/O (GPIO) BCM pin (not the physical pin number) and potentially a
|
||
# relay/transistor (e.g. UDRC/DRAWS/DigiLink)
|
||
# PTT0="PTT GPIO 12"
|
||
# 3. Use USB serial port adapter and control RS-232 signal lines (DTR, RTS)
|
||
# PTT0="PTT /dev/ttyUSB0 RTS"
|
||
# 4. Use the HamLib rig control library (open source) using a serial port or rigctld server
|
||
# See the HamLib and Direwolf documentation for details
|
||
# PTT0="RIG 120 /dev/ttyUSB0"
|
||
# PTT0="RIG 7 localhost:4532"
|
||
|
||
# DEVSTRING is the case-insensitve string to search for in /dev/serial/byid that
|
||
# is the serial port used for rig control (if rig control is used)
|
||
|
||
## DigiLink or UDRC/DRAWS. PTT0 is for left audio channel and PTT1 for right.
|
||
## If using a single audio channel, set PTT0
|
||
PTT0="PTT GPIO 23"
|
||
#PTT1="PTT GPIO 12"
|
||
DEVSTRING=""
|
||
|
||
## Signalink (Signalink uses VOX between computer and Signalink)
|
||
#PTT0=""
|
||
#PTT1="$PTT0"
|
||
#DEVSTRING=""
|
||
|
||
## USB/Serial interface for radio rig control
|
||
## Kenwood TM-D710G
|
||
#DEVSTRING="USB-Serial"
|
||
#RIGCTL_RADIO=234
|
||
#RIGCTL_SPEED=57600
|
||
#PTT0=""
|
||
|
||
## USB/Serial interface for radio rig control
|
||
## Icom IC-7100
|
||
#DEVSTRING="_A-if00-port0"
|
||
#RIGCTL_RADIO=370
|
||
#RIGCTL_SPEED=19200
|
||
#PTT0="PTT RIG 2 localhost:4532"
|
||
#PTT1="$PTT0"
|
||
|
||
#----- ARDOP (piardop2) Sound Card and PTT settings ---------------------------------------------
|
||
|
||
ARDOP_PORT=8515
|
||
|
||
## I haven't tested PulseAudio devices defined in PulseAudio, but they should work.
|
||
## Or, to use the plughw device, run 'arecord -L' to get the device name.
|
||
ARDOP_DEV="fepi-capture-right fepi-playback-right"
|
||
#ARDOP_DEV="plughw:CARD=Audio,DEV=0 plughw:CARD=Audio,DEV=0"
|
||
|
||
## Pick ONE of the following three PTT types (GPIO, CAT, or Serical) for ARDOP:
|
||
|
||
## GPIO PTT...
|
||
## For DigiLink/UDRC/DRAWS: Left radio is GPIO (BCM) 12, right radio is 23
|
||
#ARDOP_PTT="-p gpio=12"
|
||
ARDOP_PTT="-p gpio=23"
|
||
|
||
## ...or CAT Commands for rigs that support CAT...
|
||
## ARDOP requires specific CAT commands to key/unkey the radio via CAT. It can't
|
||
## use rigctld. These are the key/unkey CAT commands for most ICOM radios:
|
||
#ARDOP_DEVICE="/dev/ttyUSB0"
|
||
#ARDOP_KEY="-k FEFE88E01C0001FD"
|
||
#ARDOP_UNKEY="-u FEFE88E01C0000FD"
|
||
#ARDOP_CAT_PORT_SPEED=19200
|
||
#ARDOP_PTT="-c $ARDOP_DEVICE:$ARDOP_CAT_PORT_SPEED $ARDOP_KEY $ARDOP_UNKEY"
|
||
|
||
## ...or RTS serial PTT control for rigs that support it.
|
||
#ARDOP_DEVICE="/dev/ttyUSB0"
|
||
#ARDOP_CAT_PORT_SPEED=19200
|
||
#ARDOP_PTT="-c $ARDOP_DEVICE:$ARDOP_CAT_PORT_SPEED"
|
||
|
||
#-------------------------------------------------------------------------------------
|
||
|
||
# Change the following as needed. These settings should work in most cases. -----
|
||
|
||
# Should Direwolf print color text? 0=no, 1=yes
|
||
COLORS="0"
|
||
|
||
# Direwolf can print audio stats every n seconds (0 to disable)
|
||
AUDIOSTATS=60
|
||
|
||
#---- Direwolf KISS parameters ------------------------------------------------------
|
||
|
||
AGWPORT="AGWPORT 8010"
|
||
KISSPORT="KISSPORT 8011"
|
||
## These 1200 baud kissparms are the same as the ones in RMS Express Packet Winlink
|
||
#TXDelay=400
|
||
#TXTail=50
|
||
#Persist=160
|
||
#Slottime=30
|
||
|
||
## These 1200 baud kissparms are from https://andrewmemory.wordpress.com/tag/direwolf/
|
||
#TXDelay=200
|
||
#TXTail=50
|
||
#Persist=64
|
||
#Slottime=20
|
||
|
||
## These 1200 baud kissparm recommendations are from http://www.choisser.com/packet/part14.html
|
||
TXDelay=200
|
||
TXTail=50
|
||
Persist=64
|
||
Slottime=20
|
||
|
||
# Must match entry in /etc/ax25/axports. This script will create the entry if not present.
|
||
AX25PORT="wl2k"
|
||
AX25PORTFILE="/etc/ax25/axports"
|
||
|
||
#---- Direwolf APRS Parameters ------------------------------------------------------
|
||
|
||
# APRS transmit channel (not used for ax25)
|
||
CHANNEL="0"
|
||
|
||
# Transmit no more than 6 packets/minute and 10 packets/5 minutes
|
||
IGTXLIMIT="IGTXLIMIT 6 10"
|
||
|
||
# Filter traffic coming from the iGate server for TX out our radio. This is a
|
||
# Client Side filter. Filtering takes place within Direwolf.
|
||
# See https://github.com/wb2osz/direwolf/blob/master/doc/Successful-APRS-IGate-Operation.pdf
|
||
# Filter below says: Transmit only messages destined for stations within 16KM (10 miles)
|
||
# of this station's LAT/LONG, or anyone we've heard in the last hour [i/60/0] AND the addressee
|
||
# must have a callsign that starts with W,K,A, or N.
|
||
# Individual message filter format is: i/time/hops/lat/lon/km
|
||
# Allow “messages” for a station heard over the radio in the last ‘time’ minutes
|
||
# within the specified distance. Distance can be digipeater hops and/or geographical distance.
|
||
# Typical time limits might be 30 or 60 minutes. If we haven’t heard from a station for that
|
||
# long, it’s probably no longer hearing us. ‘hops’ is the number of digipeater hops necessary
|
||
# to hear the message addressee. If hops is not specified, the maximum transmit
|
||
# digipeater hop count, from the IGTXVIA configuration will be used.
|
||
FILTER="FILTER IG $CHANNEL ( i/30/8/$LAT/$LONG/16 | i/60/0 ) & g/W*/K*/A*/N*"
|
||
|
||
# iGate server to use
|
||
IGSERVER="IGSERVER noam.aprs2.net"
|
||
|
||
# Only transmit messages received from the iGate server to stations within 16 Km (10 miles)
|
||
# of my location. This is a Server Side filter. Direwolf sends this filter specification
|
||
# to the iGate server and the iGate server does the filtering.
|
||
IGFILTER="IGFILTER m/16"
|
||
|
||
# Number of hops
|
||
HOPS="WIDE1-1,WIDE2-1"
|
||
# For digipeat + igate only. This tells Direwolf what path to use when TX out the radio
|
||
# for data received from the iGate server.
|
||
IGTXVIA="IGTXVIA $CHANNEL $HOPS"
|
||
|
||
# Wait $IGDELAY after direwolf starts, then send a position
|
||
# beacon to iGate server and send one every $IGEVERY after that (MM:SS)
|
||
IGDELAY="00:30"
|
||
IGEVERY="15:00"
|
||
|
||
# Wait $DIGIPEATDELAY after direwolf starts, then TX a position
|
||
# beacon and send one every $DIGIPEATEVERY after that (MM:SS)
|
||
DIGIPEATDELAY="00:30"
|
||
DIGIPEATEVERY="10:00"
|
||
#------------------------------------------------------------------------------------
|
||
|
||
# END OF USER CONFIGURATION SECTION ########################################################
|