diff --git a/README.md b/README.md
index 3ee515b..fa0856b 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,6 @@
 # Hampi Utilities
 
-VERSION 20190923
+VERSION 20191002
 
 This is a collection of utilities for the Hampi image.  These scripts will only work on the Hampi image.   
 Some scripts are specific to the [Nexus DR-X](http://wb7fhc.com/nexus-dr-x.html) board.
@@ -23,6 +23,8 @@ Some scripts are specific to the [Nexus DR-X](http://wb7fhc.com/nexus-dr-x.html)
 
 [watchdog-tnc.sh](#watchdog-tnc-script)
 
+[shutdown_button.py](#shutdown-button-script)
+
 ## Installation
 
 ### Easy Install
@@ -129,3 +131,30 @@ To change it to trim log entries older than 2 weeks ago rather than yesterday, t
 	# This one igates only
 	*/2 * * * * /usr/local/bin/watchdog-tnc.sh igate >/dev/null 2>&1
 
+## Shutdown Button Script
+
+`shutdown_button.py` monitors the shutdown button found on the DigiLink REV DS and [Nexus DR-X](http://wb7fhc.com/nexus-dr-x.html) boards.  It reboots the Pi if the button is pressed more than 2 but less than 5 seconds, or shuts down the Pi if the button is pressed for more than 5 seconds.
+
+Your Hampi image already has the systemd service file for the shutdown script installed and enabled.  No further action is required to enable it, but __for documentation purposes only__, here's how to enable the service:
+
+- As sudo, create a file called `/etc/systemd/system/shutdown_button.service` with the following text:
+
+		[Unit]
+		Description=GPIO shutdown button
+		After=network.target
+
+		[Service]
+		Type=simple
+		Restart=always
+		RestartSec=1
+		User=root
+		ExecStart=/usr/bin/python3 /usr/local/bin/shutdown_button.py
+
+		[Install]
+		WantedBy=multi-user.target
+
+- Run these commands in a Terminal to enable the service:
+
+		sudo systemctl enable shutdown_button.service
+		sudo systemctl start shutdown_button.service
+
diff --git a/hampi-utilities.version b/hampi-utilities.version
index b5174a7..08936a4 100644
--- a/hampi-utilities.version
+++ b/hampi-utilities.version
@@ -1 +1 @@
-VERSION="1.1.3"
\ No newline at end of file
+VERSION="1.2.0"
\ No newline at end of file
diff --git a/shutdown_button.py b/shutdown_button.py
new file mode 100755
index 0000000..e38b065
--- /dev/null
+++ b/shutdown_button.py
@@ -0,0 +1,49 @@
+#!/usr/bin/python3                 
+
+# Version 2.0.1
+# Original script by Stewart C. Russell via https://github.com/scruss/shutdown_button
+# Modified by Steve Magnuson, AG7GN to control LED on different GPIO during Button
+# press.
+                                                                                                                                                                                
+# -*- coding: utf-8 -*-
+# example gpiozero code that could be used to have a reboot
+#  and a shutdown function on one GPIO button
+# scruss - 2017-10
+
+use_button=26     # Button on use_button (BCM GPIO 26 by default)
+
+from gpiozero import Button
+from gpiozero import LED
+from signal import pause
+from subprocess import check_call
+
+held_for=0.0
+led=LED(24)			# LED on BCM GPIO 24
+
+def rls():
+        global held_for
+        if (held_for > 5.0):
+                check_call(['/sbin/poweroff'])
+        elif (held_for > 2.0):
+                check_call(['/sbin/reboot'])
+        else:
+        	held_for = 0.0
+
+def hld():
+        # callback for when button is held
+        #  is called every hold_time seconds
+        global held_for
+        # need to use max() as held_time resets to zero on last callback
+        held_for = max(held_for, button.held_time + button.hold_time)
+        if (held_for > 5.0):
+            led.off()
+        elif (held_for > 2.0):
+            led.on()
+        else:
+            led.off()
+
+button=Button(use_button, hold_time=1.0, hold_repeat=True)
+button.when_held = hld
+button.when_released = rls
+
+pause() # wait forever