mirror of
https://github.com/AG7GN/nexus-utilities.git
synced 2025-05-21 08:50:13 -07:00
Initial push
This commit is contained in:
Steve Magnuson
parent
e77127c5bf
commit
00506ed5cb
36
check-piano.sh
Executable file
36
check-piano.sh
Executable file
@ -0,0 +1,36 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.0.0"
|
||||
|
||||
# This script checks the status of 4 GPIO pins and runs a script corresponding
|
||||
# to those settings as described below. This script is called by initialize-pi.sh,
|
||||
# which is run a bootup via cron @reboot.
|
||||
|
||||
GPIO="$(command -v gpio) -g"
|
||||
|
||||
# Array P: Array index is the ID of each individual switch in the piano switch.
|
||||
# Array element value is the GPIO BCM number.
|
||||
P[1]=25
|
||||
P[2]=13
|
||||
P[3]=6
|
||||
P[4]=5
|
||||
|
||||
# String $PIANO will identify which levers are in the DOWN position
|
||||
PIANO=""
|
||||
for I in 1 2 3 4
|
||||
do
|
||||
J=$($GPIO read ${P[$I]}) # State of a switch in the piano (0 or 1)
|
||||
(( $J == 0 )) && PIANO="$PIANO$I"
|
||||
done
|
||||
|
||||
# Check if the script corresponding to the piano switch setting exists and is not empty.
|
||||
#
|
||||
# Scripts must be in the $HOME directory, be marked as executable, and be named
|
||||
# pianoX.sh where X is one of these:
|
||||
# 1,12,13,14,123,124,134,1234,2,23,234,24,3,34,4
|
||||
#
|
||||
# Example: When the piano switch levers 2 and 4 are down, the script named
|
||||
# $HOME/piano24.sh will run whenever the Raspberry Pi starts.
|
||||
#echo "running piano$PIANO.sh"
|
||||
[ -s $HOME/piano$PIANO.sh ] && $HOME/piano$PIANO.sh
|
||||
|
||||
1
hampi-utilities.version
Normal file
1
hampi-utilities.version
Normal file
@ -0,0 +1 @@
|
||||
VERSION="1.0.0"
|
||||
187
initialize-pi.sh
Executable file
187
initialize-pi.sh
Executable file
@ -0,0 +1,187 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.14"
|
||||
|
||||
#
|
||||
# Script to generate new VNC server and SSH server keys at boot time if a certain
|
||||
# file does not exist. Run this script whenever the Pi boots by adding a crontab
|
||||
# entry, like this:
|
||||
#
|
||||
# 1) Run crontab -e
|
||||
# 2) Add the following line to the end:
|
||||
#
|
||||
# @reboot sleep 5 && /usr/local/bin/initialize-pi.sh
|
||||
#
|
||||
# 3) Save and exit the crontab editor
|
||||
#
|
||||
|
||||
DIR="$HOME"
|
||||
INIT_DONE_FILE="$DIR/DO_NOT_DELETE_THIS_FILE"
|
||||
|
||||
# Does $INIT_DONE_FILE exist? Is it a regular file? Is it not empty? If YES to all, then
|
||||
# check the status of the piano switch.
|
||||
if [ -e "$INIT_DONE_FILE" ] && [ -f "$INIT_DONE_FILE" ] && [ -s "$INIT_DONE_FILE" ]
|
||||
then
|
||||
[ -s /usr/local/bin/check-piano.sh ] && /usr/local/bin/check-piano.sh
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Got this far? Initialze this Pi!
|
||||
echo "$(date): First time boot. Initializing..." > "$INIT_DONE_FILE"
|
||||
|
||||
# Generate a new VNC key
|
||||
echo "Generate new VNC server key" >> "$INIT_DONE_FILE"
|
||||
sudo vncserver-x11 -generatekeys force >> "$INIT_DONE_FILE" 2>&1
|
||||
sudo systemctl restart vncserver-x11-serviced >/dev/null 2>&1
|
||||
|
||||
# Generate new SSH server keys
|
||||
sudo rm -v /etc/ssh/ssh_host* >> "$INIT_DONE_FILE" 2>&1
|
||||
echo "Generate new SSH server keys" >> "$INIT_DONE_FILE"
|
||||
#sudo dpkg-reconfigure -f noninteractive openssh-server >> "$INIT_DONE_FILE" 2>&1
|
||||
cd /etc/ssh
|
||||
sudo rm -f ssh_host_*
|
||||
sudo ssh-keygen -A
|
||||
sudo systemctl restart ssh >/dev/null 2>&1
|
||||
cd $HOME
|
||||
echo "Remove ssh client keys, authorized_keys and known_hosts" >> "$INIT_DONE_FILE"
|
||||
rm -f $DIR/.ssh/known_hosts
|
||||
rm -f $DIR/.ssh/authorized_keys
|
||||
rm -f $DIR/.ssh/id_*
|
||||
rm -f $DIR/.ssh/*~
|
||||
|
||||
rm -f $DIR/*~
|
||||
|
||||
echo "Remove fldigi suite logs and messages and personalized data" >> "$INIT_DONE_FILE"
|
||||
DIRS=".nbems .nbems-left .nbems-right"
|
||||
for D in $DIRS
|
||||
do
|
||||
rm -f ${DIR}/${D}/*~
|
||||
rm -f $DIR/$D/debug*
|
||||
rm -f $DIR/$D/flmsg.sernbrs
|
||||
rm -f $DIR/$D/ICS/*.html
|
||||
rm -f $DIR/$D/ICS/*.csv
|
||||
rm -f $DIR/$D/ICS/messages/*
|
||||
rm -f $DIR/$D/ICS/templates/*
|
||||
rm -f $DIR/$D/ICS/log_files/*
|
||||
rm -f $DIR/$D/WRAP/auto/*
|
||||
rm -f $DIR/$D/WRAP/recv/*
|
||||
rm -f $DIR/$D/WRAP/send/*
|
||||
rm -f $DIR/$D/TRANSFERS/*
|
||||
rm -f $DIR/$D/FLAMP/*log*
|
||||
rm -f $DIR/$D/FLAMP/rx/*
|
||||
rm -f $DIR/$D/FLAMP/tx/*
|
||||
rm -f $DIR/$D/ARQ/files/*
|
||||
rm -f $DIR/$D/ARQ/recv/*
|
||||
rm -f $DIR/$D/ARQ/send/*
|
||||
rm -f $DIR/$D/ARQ/mail/in/*
|
||||
rm -f $DIR/$D/ARQ/mail/out/*
|
||||
rm -f $DIR/$D/ARQ/mail/sent/*
|
||||
if [ -f $DIR/$D/FLMSG.prefs ]
|
||||
then
|
||||
sed -i -e 's/^mycall:.*/mycall:N0ONE/' \
|
||||
-e 's/^mytel:.*/mytel:/' \
|
||||
-e 's/^myname:.*/myname:/' \
|
||||
-e 's/^myaddr:.*/myaddr:/' \
|
||||
-e 's/^mycity:.*/mycity:/' \
|
||||
-e 's/^myemail:.*/myemail:/' \
|
||||
-e 's/^sernbr:.*/sernbr:1/' \
|
||||
-e 's/^rgnbr:.*/rgnbr:1/' \
|
||||
-e 's/^rri:.*/rri:1/' \
|
||||
-e 's/^sernbr_fname:.*/sernbr_fname:1/' \
|
||||
-e 's/^rgnbr_fname:.*/rgnbr_fname:1/' $DIR/$D/FLMSG.prefs
|
||||
fi
|
||||
done
|
||||
|
||||
DIRS=".fldigi .fldigi-left .fldigi-right"
|
||||
for D in $DIRS
|
||||
do
|
||||
for F in $(ls -R $DIR/$D/*log* 2>/dev/null)
|
||||
do
|
||||
[ -e $F ] && [ -f $F ] && rm -f $F
|
||||
done
|
||||
rm -f $DIR/$D/*~
|
||||
rm -f $DIR/$D/debug/*txt*
|
||||
rm -f $DIR/$D/logs/*
|
||||
rm -f $DIR/$D/LOTW/*
|
||||
rm -f $DIR/$D/rigs/*
|
||||
rm -f $DIR/$D/temp/*
|
||||
rm -f $DIR/$D/kml/*
|
||||
rm -f $DIR/$D/wrap/*
|
||||
if [ -f $DIR/$D/fldigi_def.xml ]
|
||||
then
|
||||
sed -i -e 's/<MYCALL>.*<\/MYCALL>/<MYCALL>N0ONE<\/MYCALL>/' \
|
||||
-e 's/<MYQTH>.*<\/MYQTH>/<MYQTH><\/MYQTH>/' \
|
||||
-e 's/<MYNAME>.*<\/MYNAME>/<MYNAME><\/MYNAME>/' \
|
||||
-e 's/<MYLOC>.*<\/MYLOC>/<MYLOC><\/MYLOC>/' \
|
||||
-e 's/<MYANTENNA>.*<\/MYANTENNA>/<MYANTENNA><\/MYANTENNA>/' \
|
||||
-e 's/<OPERCALL>.*<\/OPERCALL>/<OPERCALL><\/OPERCALL>/' \
|
||||
-e 's/<PORTINDEVICE>.*<\/PORTINDEVICE>/<PORTINDEVICE><\/PORTINDEVICE>/' \
|
||||
-e 's/<PORTININDEX>.*<\/PORTININDEX>/<PORTININDEX>-1<\/PORTININDEX>/' \
|
||||
-e 's/<PORTOUTDEVICE>.*<\/PORTOUTDEVICE>/<PORTOUTDEVICE><\/PORTOUTDEVICE>/' \
|
||||
-e 's/<PORTOUTINDEX>.*<\/PORTOUTINDEX>/<PORTOUTINDEX>-1<\/PORTOUTINDEX>/' $DIR/$D/fldigi_def.xml
|
||||
fi
|
||||
done
|
||||
|
||||
DIRS=".flrig .flrig-left .flrig-right"
|
||||
for D in $DIRS
|
||||
do
|
||||
if [ -f $DIR/$D/flrig.prefs ]
|
||||
then
|
||||
sed -i 's/^xcvr_name:.*/xcvr_name:NONE/' $DIR/$D/flrig.prefs 2>/dev/null
|
||||
mv $DIR/$D/flrig.prefs $DIR/$D/flrig.prefs.temp
|
||||
rm -f $DIR/$D/*.prefs
|
||||
mv $DIR/$D/flrig.prefs.temp $DIR/$D/flrig.prefs
|
||||
fi
|
||||
rm -f $DIR/$D/debug*
|
||||
rm -f ${DIR}/${D}/*~
|
||||
done
|
||||
|
||||
# Restore defaults for rmsgw
|
||||
|
||||
echo "Restore defaults for RMS Gateway" >> "$INIT_DONE_FILE"
|
||||
( systemctl list-units | grep -q "ax25.*loaded" ) && sudo systemctl disable ax25
|
||||
[ -L /etc/ax25/ax25-up ] && sudo rm -f /etc/ax25/ax25-up
|
||||
[ -f /etc/rmsgw/channels.xml ] && sudo rm -f /etc/rmsgw/channels.xml
|
||||
[ -f /etc/rmsgw/banner ] && sudo rm -f /etc/rmsgw/banner
|
||||
[ -f /etc/rmsgw/gateway.conf ] && sudo rm -f /etc/rmsgw/gateway.conf
|
||||
[ -f /etc/rmsgw/sysop.xml ] && sudo rm -f /etc/rmsgw/sysop.xml
|
||||
[ -f /etc/ax25/ax25d.conf ] && sudo rm -f /etc/ax25/ax25d.conf
|
||||
[ -f /etc/ax25/ax25-up.new ] && sudo rm -f /etc/ax25/ax25-up.new
|
||||
[ -f /etc/ax25/ax25-up.new2 ] && sudo rm -f /etc/ax25/ax25-up.new2
|
||||
[ -f /etc/ax25/direwolf.conf ] && sudo rm -f /etc/ax25/direwolf.conf
|
||||
[ -f $HOME/rmsgw.conf ] && rm -f $HOME/rmsgw.conf
|
||||
id -u rmsgw >/dev/null 2>&1 && sudo crontab -u rmsgw -r 2>/dev/null
|
||||
|
||||
#rm -rf $DIR/.flrig/
|
||||
#rm -rf $DIR/.fldigi/
|
||||
#rm -rf $DIR/.fltk/
|
||||
|
||||
# Remove Auto Hot-Spot if configured
|
||||
echo "Remove Auto-HotSpot" >> "$INIT_DONE_FILE"
|
||||
rm -f $HOME/autohotspot.conf
|
||||
sudo sed -i 's|^net.ipv4.ip_forward=1|#net.ipv4.ip_forward=1|' /etc/sysctl.conf
|
||||
if systemctl | grep -q "autohotspot"
|
||||
then
|
||||
sudo systemctl disable autohotspot
|
||||
fi
|
||||
if [ -s /etc/dhcpcd.conf ]
|
||||
then
|
||||
TFILE="$(mktemp)"
|
||||
grep -v "^nohook wpa_supplicant" /etc/dhcpcd.conf > $TFILE
|
||||
sudo mv -f $TFILE /etc/dhcpcd.conf
|
||||
fi
|
||||
# Remove cronjob if present
|
||||
crontab -u $USER -l | grep -v "autohotspotN" | crontab -u $USER -
|
||||
|
||||
# Set radio names to default
|
||||
rm -f $HOME/radionames.conf
|
||||
D="/usr/local/share/applications"
|
||||
for F in `ls $D/*-left.template 2>/dev/null` `ls $D/*-right.template 2>/dev/null`
|
||||
do
|
||||
sudo sed -e "s/_LEFT_RADIO_/Left Radio/" -e "s/_RIGHT_RADIO_/Right Radio/g" $F > ${F%.*}.desktop
|
||||
done
|
||||
|
||||
echo "Raspberry Pi initialization complete" >> "$INIT_DONE_FILE"
|
||||
sudo shutdown -r now
|
||||
|
||||
|
||||
75
name-radios.sh
Executable file
75
name-radios.sh
Executable file
@ -0,0 +1,75 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.0.3"
|
||||
|
||||
# This script allows the user to change the title bar of Fldigi suite and Direwolf applications so they
|
||||
# say something other than "Left Radio" or "Right Radio"
|
||||
|
||||
TITLE="Left/Right Radio Name Editor $VERSION"
|
||||
CONFIG_FILE="$HOME/radionames.conf"
|
||||
|
||||
trap errorReport INT
|
||||
|
||||
function errorReport () {
|
||||
echo
|
||||
if [[ $1 == "" ]]
|
||||
then
|
||||
exit 0
|
||||
else
|
||||
if [[ $2 == "" ]]
|
||||
then
|
||||
echo >&2 "$1"
|
||||
exit 1
|
||||
else
|
||||
echo >&2 "$1"
|
||||
exit $2
|
||||
fi
|
||||
fi
|
||||
}
|
||||
|
||||
if [ -s "$CONFIG_FILE" ]
|
||||
then # There is a config file
|
||||
echo "$CONFIG_FILE found."
|
||||
source "$CONFIG_FILE"
|
||||
else # Set some default values in a new config file
|
||||
echo "Config file $CONFIG_FILE not found. Creating a new one with default values."
|
||||
echo "LEFT_RADIO_NAME=\"Left Radio\"" > "$CONFIG_FILE"
|
||||
echo "RIGHT_RADIO_NAME=\"Right Radio\"" >> "$CONFIG_FILE"
|
||||
source "$CONFIG_FILE"
|
||||
fi
|
||||
|
||||
|
||||
ANS=""
|
||||
ANS="$(yad --title="$TITLE" \
|
||||
--text="<b><big><big>Auto-HotSpot Configuration Parameters</big></big>\n\n</b>Status: <b><span color='blue'>$STATUS</span>\n\n \
|
||||
$MESSAGE</b>\n" \
|
||||
--item-separator="!" \
|
||||
--center \
|
||||
--buttons-layout=center \
|
||||
--text-align=center \
|
||||
--align=right \
|
||||
--borders=20 \
|
||||
--form \
|
||||
--field="Left Radio Name" "$LEFT_RADIO_NAME" \
|
||||
--field="Right Radio Name" "$RIGHT_RADIO_NAME" \
|
||||
--focus-field 1 \
|
||||
)"
|
||||
|
||||
[[ $? == 1 || $? == 252 ]] && errorReport # User has cancelled.
|
||||
|
||||
[[ $ANS == "" ]] && errorReport "Error." 1
|
||||
|
||||
IFS='|' read -r -a TF <<< "$ANS"
|
||||
|
||||
LEFT_RADIO_NAME="${TF[0]}"
|
||||
RIGHT_RADIO_NAME="${TF[1]}"
|
||||
echo "LEFT_RADIO_NAME=\"$LEFT_RADIO_NAME\"" > "$CONFIG_FILE"
|
||||
echo "RIGHT_RADIO_NAME=\"$RIGHT_RADIO_NAME\"" >> "$CONFIG_FILE"
|
||||
|
||||
D="/usr/local/share/applications"
|
||||
for F in `ls $D/*-left.template` `ls $D/*-right.template`
|
||||
do
|
||||
sudo sed -e "s/_LEFT_RADIO_/$LEFT_RADIO_NAME/" -e "s/_RIGHT_RADIO_/$RIGHT_RADIO_NAME/g" $F > ${F%.*}.desktop
|
||||
done
|
||||
|
||||
|
||||
75
patmail.sh
Executable file
75
patmail.sh
Executable file
@ -0,0 +1,75 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.0.7"
|
||||
|
||||
# This script allows sending Winlink messages via the command line or script.
|
||||
# It requires pat (a Winlink client) and the dos2unix programs.
|
||||
|
||||
function Usage () {
|
||||
echo
|
||||
echo "ERROR: $1"
|
||||
echo
|
||||
echo "$(basename $0) version $VERSION"
|
||||
echo
|
||||
echo "Usage: $(basename $0) To Subject Transport"
|
||||
echo
|
||||
echo "Where:"
|
||||
echo
|
||||
echo " To One or more destination email addresses, separated"
|
||||
echo " by a comma. Winlink addresses need only be the call sign,"
|
||||
echo " no need to include '@winlink.org'."
|
||||
echo
|
||||
echo " Subject The subject of the message. Put double quotes"
|
||||
echo " around it if it contains spaces."
|
||||
echo
|
||||
echo " Transport The pat transport type. Examples:"
|
||||
echo
|
||||
echo " telnet"
|
||||
echo " ax25:///call-ssid"
|
||||
echo " where call-ssid is the RMS Gateway. Example: W7ECG-10"
|
||||
echo
|
||||
echo " Run 'pat connect help' for more examples."
|
||||
echo
|
||||
echo "Pass the body of the message to the script from stdin. Examples:"
|
||||
echo
|
||||
echo " echo -e \"1st line of body\\n2nd line\" | $(basename $0) N0ONE \"My Subject\" telnet"
|
||||
echo " cat myfile.txt | $(basename $0) me@example.com,W7ABC \"My Important Message\" telnet"
|
||||
echo " $(basename $0) me@example.com,W7ABC \"My Important Message\" telnet < myfile.txt"
|
||||
echo
|
||||
exit 1
|
||||
}
|
||||
|
||||
(( $# != 3 )) && Usage "3 arguments are required."
|
||||
|
||||
PAT="$(command -v pat)"
|
||||
[[ $? == 0 ]] || Usage "pat winlink client is not installed."
|
||||
UNIX2DOS="$(command -v unix2dos)"
|
||||
[[ $UNIX2DOS == "" ]] && Usage "dos2unix tools are not installed."
|
||||
|
||||
PATDIR="$HOME/.wl2k"
|
||||
CALL="$(cat $PATDIR/config.json | grep "\"mycall\":" | tr -d ' ",' | cut -d: -f2)"
|
||||
[[ $CALL == "" ]] && Usage "Could not obtain call sign from $PATDIR/config.json. Is pat configured?"
|
||||
OUTDIR="$PATDIR/mailbox/$CALL/out"
|
||||
|
||||
TO="$1"
|
||||
SUBJECT="$2"
|
||||
|
||||
[[ $TO =~ "," ]] || TO="$TO\n"
|
||||
|
||||
export EDITOR=ed
|
||||
TFILE="$(mktemp)"
|
||||
echo -e "$CALL\n$TO\n\n$SUBJECT" | pat compose 2>/dev/null 1> $TFILE
|
||||
MSG="$(grep "MID:" $TFILE | tr -d ' \t' | cut -d':' -f3)"
|
||||
[[ $MSG == "" ]] && Usage "Could not find the MID (Message ID)"
|
||||
MSG="$OUTDIR/$MSG.b2f"
|
||||
sed -i -e 's/<No message body>//' $MSG
|
||||
$UNIX2DOS -q $MSG
|
||||
cat - > $TFILE
|
||||
$UNIX2DOS -q $TFILE
|
||||
COUNT="$(wc -c $TFILE | cut -d' ' -f1)"
|
||||
cat $TFILE >> $MSG
|
||||
rm $TFILE
|
||||
sed -i -e "s/^Body: .*/Body: $COUNT/" $MSG
|
||||
$PAT --send-only --event-log /dev/null connect $3 >/dev/null 2>&1
|
||||
exit $?
|
||||
|
||||
40
test-piano.sh
Executable file
40
test-piano.sh
Executable file
@ -0,0 +1,40 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.0.1"
|
||||
|
||||
# This script checks the status of 4 GPIO pins and runs a script corresponding
|
||||
# to those settings as described below. This script is called by initialize-pi.sh,
|
||||
# which is run a bootup via cron @reboot.
|
||||
|
||||
GPIO="$(command -v gpio) -g"
|
||||
|
||||
# Array P: Array index is the ID of each individual switch in the piano switch.
|
||||
# Array element value is the GPIO BCM number.
|
||||
P[1]=25
|
||||
P[2]=13
|
||||
P[3]=6
|
||||
P[4]=5
|
||||
|
||||
# String $PIANO will identify which levers are in the DOWN position
|
||||
PIANO=""
|
||||
for I in 1 2 3 4
|
||||
do
|
||||
J=$($GPIO read ${P[$I]}) # State of a switch in the piano (0 or 1)
|
||||
(( $J == 0 )) && PIANO="$PIANO$I"
|
||||
done
|
||||
|
||||
# Check if the script corresponding to the piano switch setting exists and is not empty.
|
||||
#
|
||||
# Scripts must be in the $HOME directory, be marked as executable, and be named
|
||||
# pianoX.sh where X is one of these:
|
||||
# 1,12,13,14,123,124,134,1234,2,23,234,24,3,34,4
|
||||
#
|
||||
# Example: When the piano switch levers 2 and 4 are down, the script named
|
||||
# $HOME/piano24.sh will run whenever the Raspberry Pi starts.
|
||||
|
||||
[[ $PIANO == "" ]] && MESSAGE="No levers are down." || MESSAGE="Levers $PIANO are down."
|
||||
|
||||
yad --center --title="Test calling pianoX.sh script - version $VERSION" --info --borders=30 \
|
||||
--no-wrap --text="<b>$MESSAGE $HOME/piano$PIANO.sh will run.</b>" --buttons-layout=center \
|
||||
--button=Close:0
|
||||
|
||||
614
tnc.sh
Executable file
614
tnc.sh
Executable file
@ -0,0 +1,614 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
# Script Name: tnc.sh
|
||||
# Author: Steve Magnuson AG7GN
|
||||
# Date Created: 20180601
|
||||
#
|
||||
# Description: This script will start direwolf in one of 3 APRS modes: igate, digipeater,
|
||||
# or igate + digipeater, OR in AX.25 mode as a TNC for Winlink or other apps.
|
||||
# Run tnc.sh with no arguments for instructions.
|
||||
#
|
||||
# Usage: tnc.sh start digi|igate|digiigate|ax25
|
||||
# tnc.sh stop
|
||||
#
|
||||
# Use the companion script watchdog-tnc.sh in crontab to launch this script
|
||||
# to keep it running.
|
||||
#
|
||||
#===========================================================================================
|
||||
VERSION="3.0.2"
|
||||
|
||||
# BEGINNING OF USER CONFIGURATION SECTION ########################################################
|
||||
|
||||
TNC_CONFIG_FILE="$HOME/tnc.conf"
|
||||
|
||||
if [ -s "$TNC_CONFIG_FILE" ]
|
||||
then
|
||||
source $HOME/tnc.conf
|
||||
else
|
||||
echo >&2 "Error: Configuration file $TNC_CONFIG_FILE is missing or empty."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# END OF USER CONFIGURATION SECTION ########################################################
|
||||
|
||||
# Initializations ##########################################################################
|
||||
|
||||
# trap ctrl-c and call ctrl_c()
|
||||
trap ctrl_c INT
|
||||
|
||||
LOGFILE="/tmp/tnc.log"
|
||||
SCREENCONFIG="/tmp/tnc.sh.screenrc"
|
||||
ACTION="${1,,}" # start|stop
|
||||
DMODE="${2,,}" # direwolf mode: digi,igate,digi+igate,ax25
|
||||
SPEED="${3,,}" # speed. No value implies 1200. Otherwise, allowed values are 300 or 9600.
|
||||
AUDIO_CHANNELS="$4"
|
||||
[[ $SPEED == "" ]] && SPEED="1200"
|
||||
[[ $AUDIO_CHANNELS == "" ]] && AUDIO_CHANNELS="1"
|
||||
declare -a ORDERS
|
||||
declare -A CMDS
|
||||
CMDS[direwolf]="$(which direwolf) -a $AUDIOSTATS -t $COLORS -r $ARATE"
|
||||
cat > $SCREENCONFIG << EOF
|
||||
logfile $LOGFILE
|
||||
logfile flush 1
|
||||
logtstamp on
|
||||
logtstamp after 60
|
||||
log on
|
||||
logtstamp string "[ %n:%t ] ---- TIMESTAMP ---- %Y-%m-%d %c:%s ---- Press Ctrl-C to Quit\012"
|
||||
EOF
|
||||
|
||||
# Functions ################################################################################
|
||||
|
||||
function ctrl_c () {
|
||||
# Do cleanup if Ctrl-C is pressed. Stop all the screens.
|
||||
$0 stop
|
||||
exit 0
|
||||
}
|
||||
|
||||
function Usage() {
|
||||
echo
|
||||
echo "Version $VERSION"
|
||||
echo
|
||||
echo "$(basename $0) usage:"
|
||||
echo
|
||||
echo "$(basename $0) start ax25|ax25+pat [1200|9600 [2]]"
|
||||
echo " Starts the ax25 TNC or the ax25 TNC and pat email client."
|
||||
echo " Note that pat requires configuration in"
|
||||
echo " $HOME/.wl2k/config.json."
|
||||
echo
|
||||
echo " Direwolf baud set to 1200 bps (for V/UHF) on a single"
|
||||
echo " audio channel by default."
|
||||
echo " You can optionally specify baud (1200 or 9600) and number"
|
||||
echo " of audio channels. 9600 might work on V/UHF"
|
||||
echo " with another 9600 station depending on conditions and"
|
||||
echo " the capabilities of your soundcard. 9600 will likely"
|
||||
echo " not work with a Signalink."
|
||||
echo " If you specify the baud, you can optionally also specify"
|
||||
echo " 2 to tell Direwolf to use both channels. '2' assumes"
|
||||
echo " you have a stereo audio card and direwolf uses both the left"
|
||||
echo " and right channels. Winlink clients can access Direwolf's"
|
||||
echo " second channel by selecting Packet TNC Type 'KISS Port 2'"
|
||||
echo " in Winlink. Default is a single channel."
|
||||
echo " 1200 baud uses Direwolf's AFSK 1200 & 2200 Hz modem."
|
||||
echo " 9600 baud uses Direwolf's K9NG/G3RUH modem."
|
||||
echo
|
||||
echo "$(basename $0) start pat"
|
||||
echo " Starts pat email client in telnet mode only (niether ax25"
|
||||
echo " not ARDOP TNC is started)."
|
||||
echo " Note that pat requires configuration in"
|
||||
echo " $HOME/.wl2k/config.json."
|
||||
echo
|
||||
echo "$(basename $0) start ardop|ardop+pat"
|
||||
echo " Starts the ARDOP TNC (piardop2) or the ARDFOP TNC and pat."
|
||||
echo " Note that pat requires configuration in"
|
||||
echo " $HOME/.wl2k/config.json."
|
||||
echo
|
||||
echo "$(basename $0) start digiigate [both]"
|
||||
echo " Starts the Direwolf APRS digipeater and iGate."
|
||||
echo " If you specify 'both', Direwolf will decode audio on"
|
||||
echo " channel 1 (stereo left) and channel 2 (stereo right)"
|
||||
echo " on stereo sound cards only."
|
||||
echo
|
||||
echo "$(basename $0) start digi [both]"
|
||||
echo " Starts the Direwolf APRS digipeater (only)."
|
||||
echo " If you specify 'both', Direwolf will decode audio on"
|
||||
echo " channel 1 (stereo left) and channel 2 (stereo right)"
|
||||
echo " on stereo sound cards only."
|
||||
echo
|
||||
echo "$(basename $0) start igate [both]"
|
||||
echo " Starts the Direwolf APRS iGate (only)."
|
||||
echo " If you specify 'both', Direwolf will decode audio on"
|
||||
echo " channel 1 (stereo left) and channel 2 (stereo right)"
|
||||
echo " on stereo sound cards only."
|
||||
echo
|
||||
echo "$(basename $0) stop"
|
||||
echo " Stops all the apps."
|
||||
echo
|
||||
exit 1
|
||||
}
|
||||
|
||||
function checkApp () {
|
||||
APP="$(which $1)"
|
||||
if [[ $APP == "" ]]
|
||||
then
|
||||
echo >&2 "Error: $1 is required but not installed."
|
||||
exit 1
|
||||
fi
|
||||
echo "$APP"
|
||||
}
|
||||
|
||||
function aprsPasscode () {
|
||||
# Generates the APRS website passcode from the supplied callsign
|
||||
CALL="$(echo ${1^^} | cut -d'-' -f1)"
|
||||
H="0x73e2"
|
||||
declare -i LEN=${#CALL}
|
||||
declare -i I=0
|
||||
while [ $I -lt $LEN ]
|
||||
do
|
||||
H=$(( $H ^ $(($(printf '%d' "'${CALL:$I:2}") << 8)) ))
|
||||
H=$(( $H ^ $(printf '%d' "'${CALL:$(( I+1 )):2}") ))
|
||||
(( I+=2 ))
|
||||
done
|
||||
echo -n $(( $H & 0x7fff ))
|
||||
}
|
||||
|
||||
function checkSoundCard () {
|
||||
# Checks for the presence of the requested sound card
|
||||
if [[ $AUDIO_DEV != "" ]]
|
||||
then
|
||||
CAP_DEV="$AUDIO_DEV"
|
||||
elif [[ $AUDIO_DEV_SEARCH_STRING == "" ]]
|
||||
then
|
||||
echo >&2 "Error: You must set either the AUDIO_DEV or AUDIO_DEV_SEARCH_STRING variables in this script to select the sound card."
|
||||
exit 1
|
||||
else
|
||||
CAP_DEV="$($ARECORD -l | grep -i "$AUDIO_DEV_SEARCH_STRING" | grep "card [0-9]\|device [0-9]" | sed 's/:.*,/,/;s/:.*$//;s/, /,/;s/ /=/g;s/ice//' | tr -s [:lower:] [:upper:])"
|
||||
if [[ $CAP_DEV == "" ]]
|
||||
then
|
||||
echo >&2 "Error: Unable to find audio interface using string $AUDIO_DEV_SEARCH_STRING."
|
||||
sleep 5
|
||||
exit 1
|
||||
fi
|
||||
CAP_DEV="plughw:$CAP_DEV"
|
||||
fi
|
||||
}
|
||||
|
||||
function makeConfig() {
|
||||
# direwolf.conf parameters
|
||||
ADEVICE="$CAP_DEV"
|
||||
CONFFILE="$(mktemp)"
|
||||
case "$1" in
|
||||
digi*|igate)
|
||||
PASSCODE="$(aprsPasscode $MYCALL)"
|
||||
case "$SPEED" in
|
||||
both) # Decode stereo right (channel 1) and stereo left (channel 0)
|
||||
FROM_CHANNEL="1"
|
||||
TO_CHANNEL="0"
|
||||
cat >> $CONFFILE << EOF
|
||||
ADEVICE $ADEVICE
|
||||
ACHANNELS 2
|
||||
CHANNEL 0
|
||||
$PTT0
|
||||
MYCALL $MYCALL
|
||||
MODEM 1200
|
||||
CHANNEL 1
|
||||
$PTT1
|
||||
MYCALL $MYCALL
|
||||
MODEM 1200
|
||||
EOF
|
||||
;;
|
||||
*) # Decode stereo left only
|
||||
FROM_CHANNEL="0"
|
||||
TO_CHANNEL="0"
|
||||
cat >> $CONFFILE << EOF
|
||||
ADEVICE $ADEVICE
|
||||
ACHANNELS 1
|
||||
CHANNEL 0
|
||||
$PTT0
|
||||
MYCALL $MYCALL
|
||||
MODEM 1200
|
||||
EOF
|
||||
;;
|
||||
esac
|
||||
case "$1" in
|
||||
digi*) # digipeater+igate or digipeater
|
||||
if [[ $1 == "digi" ]] # digipeat ONLY
|
||||
then
|
||||
IGLOGIN=""
|
||||
PBEACONIG=""
|
||||
IGTXVIA=""
|
||||
COMMENT="$COMMENTCALL Digipeater | $LOC"
|
||||
else # Digipeater + iGate
|
||||
# IGTXVIA is set at the top of the script
|
||||
COMMENT="$COMMENTCALL Digipeater+iGate | $LOC"
|
||||
PBEACONIG="PBEACON sendto=IG delay=$IGDELAY every=$IGEVERY symbol=\"igate\" overlay=T lat=$LAT long=$LONG COMMENT=\"$COMMENT\""
|
||||
IGLOGIN="IGLOGIN $MYCALL $PASSCODE"
|
||||
fi
|
||||
DIGIPEAT="DIGIPEAT $FROM_CHANNEL $TO_CHANNEL ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE"
|
||||
PBEACON="PBEACON delay=$DIGIPEATDELAY every=$DIGIPEATEVERY symbol=\"digi\" overlay=S lat=$LAT long=$LONG POWER=$POWER HEIGHT=$HEIGHT GAIN=$GAIN COMMENT=\"$COMMENT\" via=$HOPS"
|
||||
;;
|
||||
*) # iGate
|
||||
PBEACON=""
|
||||
DIGIPEAT=""
|
||||
IGTXVIA=""
|
||||
COMMENT="$COMMENTCALL iGate | $LOC"
|
||||
PBEACONIG="PBEACON sendto=IG delay=$IGDELAY every=$IGEVERY symbol=\"igate\" overlay=R lat=$LAT long=$LONG COMMENT=\"$COMMENT\""
|
||||
IGLOGIN="IGLOGIN $MYCALL $PASSCODE"
|
||||
;;
|
||||
esac
|
||||
cat >> $CONFFILE << EOF
|
||||
$AGWPORT
|
||||
$KISSPORT
|
||||
$PBEACONIG
|
||||
$PBEACON
|
||||
$DIGIPEAT
|
||||
$IGTXVIA
|
||||
$IGLOGIN
|
||||
$FILTER
|
||||
$IGSERVER
|
||||
$IGTXLIMIT
|
||||
$IGFILTER
|
||||
EOF
|
||||
;;
|
||||
ax25)
|
||||
case "$SPEED" in
|
||||
1200|9600)
|
||||
case "$AUDIO_CHANNELS" in
|
||||
2) # Assumes stereo input - use both channels
|
||||
if [[ $PTT0 =~ "GPIO" ]]
|
||||
then # Allow only one radio at a time to transmit
|
||||
TXINH0="TXINH $(echo $PTT1 | sed 's/PTT //')"
|
||||
TXINH1="TXINH $(echo $PTT0 | sed 's/PTT //')"
|
||||
else
|
||||
TXINH0=""
|
||||
TXINH1=""
|
||||
fi
|
||||
cat > $CONFFILE << EOF
|
||||
ADEVICE $ADEVICE
|
||||
ACHANNELS 2
|
||||
CHANNEL 0
|
||||
MODEM $SPEED
|
||||
$PTT0
|
||||
$TXINH0
|
||||
MYCALL $MYCALL
|
||||
CHANNEL 1
|
||||
MODEM $SPEED
|
||||
$PTT1
|
||||
$TXINH1
|
||||
MYCALL $MYCALL
|
||||
$AGWPORT
|
||||
$KISSPORT
|
||||
EOF
|
||||
;;
|
||||
*) # Use only left channel
|
||||
cat > $CONFFILE << EOF
|
||||
ADEVICE $ADEVICE
|
||||
ACHANNELS 1
|
||||
CHANNEL 0
|
||||
MODEM $SPEED
|
||||
$PTT0
|
||||
MYCALL $MYCALL
|
||||
$AGWPORT
|
||||
$KISSPORT
|
||||
EOF
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
echo >&2 "Error: Valid baud settings are 1200 or 9600."
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
ardop)
|
||||
CONFFILE=""
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
echo "$CONFFILE"
|
||||
}
|
||||
|
||||
|
||||
function checkSerial () {
|
||||
if [[ $DEVSTRING == "" ]]
|
||||
then # No rig defined. Don't use rigctld or ARDOP CAT commands to key radio
|
||||
CMDS[rigctld]=""
|
||||
else
|
||||
SERIAL_PORT="$(find -P /dev/serial/by-id -maxdepth 1 -type l -exec echo -n "{} -> " \; -exec readlink {} \; | \
|
||||
grep "$DEVSTRING" | cut -d' ' -f3 | tr -d './')"
|
||||
if [[ $SERIAL_PORT == "" ]]
|
||||
then # rigctl or ardop CAT control requested, but could not find serial port
|
||||
echo >&2 "Error: Could not locate serial device with name containing \"$DEVSTRING\"."
|
||||
exit 1
|
||||
fi
|
||||
DEVICE="/dev/$SERIAL_PORT"
|
||||
if [[ $RIGCTL_RADIO != "" ]]
|
||||
then
|
||||
CMDS[rigctld]="$(which rigctld) -m $RIGCTL_RADIO -r $DEVICE -s $RIGCTL_SPEED"
|
||||
else
|
||||
CMDS[rigctld]=""
|
||||
fi
|
||||
fi
|
||||
}
|
||||
|
||||
# Main #############################################################################################
|
||||
|
||||
SCREEN="$(checkApp screen)"
|
||||
ARECORD="$(checkApp arecord)"
|
||||
WGET="$(checkApp wget)"
|
||||
case "$ACTION" in
|
||||
start)
|
||||
checkSoundCard
|
||||
echo "" > $LOGFILE
|
||||
echo
|
||||
echo "Version $VERSION"
|
||||
echo "Running $0 $ACTION $DMODE $SPEED $AUDIO_CHANNELS"
|
||||
echo "Mode: $DMODE Speed: $SPEED Audio Device: $CAP_DEV Audio Channels: $AUDIO_CHANNELS"
|
||||
echo
|
||||
case "$DMODE" in
|
||||
pat)
|
||||
checkSerial
|
||||
if [[ ${CMDS[rigctld]} == "" ]]
|
||||
then
|
||||
echo "rigctld will not be used."
|
||||
ORDERS=( pat )
|
||||
else
|
||||
echo "rigctld will use radio found on $DEVICE."
|
||||
ORDERS=( rigctld pat )
|
||||
fi
|
||||
echo "NOTE: If you haven't already done so, you must run 'pat configure' or manually"
|
||||
echo " configure $HOME/.wl2k/config.json to use pat."
|
||||
echo
|
||||
CMDS[pat]="$(which pat) -l telnet http"
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
$SCREEN -c $SCREENCONFIG -L -d -m -S ${ORDERS[$i]} ${CMDS[${ORDERS[$i]}]}
|
||||
echo "============================"
|
||||
done
|
||||
screen -list
|
||||
echo
|
||||
sleep 2
|
||||
rm -f $CONFFILE
|
||||
if [[ $GRID != "" ]]
|
||||
then
|
||||
if $WGET -q --tries=2 --timeout=5 --spider http://google.com
|
||||
then # There is an internet connection, so get local RMS list
|
||||
GRID="${GRID:0:4}"
|
||||
GRID="${GRID^^}"
|
||||
echo
|
||||
echo "RMS Stations in grid square $GRID:"
|
||||
$(which pat) rmslist | grep "${GRID}\|callsign" | sort -k 3,3 -n
|
||||
fi
|
||||
fi
|
||||
echo
|
||||
echo "Tailing $LOGFILE. All apps log to this file. Press Ctrl-C to quit all apps."
|
||||
echo
|
||||
tail -n 150 -F $LOGFILE
|
||||
;;
|
||||
*ax25*)
|
||||
checkSerial
|
||||
if [[ ${CMDS[rigctld]} == "" ]]
|
||||
then
|
||||
echo "rigctld will not be used."
|
||||
case "$DMODE" in
|
||||
*pat*)
|
||||
ORDERS=( direwolf pat )
|
||||
;;
|
||||
*)
|
||||
ORDERS=( direwolf )
|
||||
;;
|
||||
esac
|
||||
else
|
||||
case "$DMODE" in
|
||||
*pat*)
|
||||
ORDERS=( rigctld direwolf pat )
|
||||
;;
|
||||
*)
|
||||
ORDERS=( rigctld direwolf )
|
||||
;;
|
||||
esac
|
||||
echo "rigctld will use radio found on $DEVICE."
|
||||
fi
|
||||
if [[ $DMODE =~ "pat" ]]
|
||||
then
|
||||
echo "NOTE: If you haven't already done so, you must run 'pat configure' or manually"
|
||||
echo " configure $HOME/.wl2k/config.json to use pat."
|
||||
echo
|
||||
CMDS[pat]="$(which pat) -l ax25,telnet http"
|
||||
fi
|
||||
# Check that the app is installed.
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
which ${ORDERS[$i]} >/dev/null
|
||||
[ $? -eq 0 ] && echo "${ORDERS[$i]} found." || { echo >&2 "${ORDERS[$i]} required but not found. Aborting."; exit 1; }
|
||||
# Kill existing session if it exists
|
||||
SCR="$($SCREEN -list | grep ${ORDERS[$i]} | tr -d ' \t' | cut -d'(' -f1 | tr -d '\n')"
|
||||
[[ "$SCR" != "" ]] && { pkill piardop2; $SCREEN -S $SCR -X quit; }
|
||||
done
|
||||
## Kill existing session if it exists
|
||||
sudo killall kissattach 2>/dev/null
|
||||
## Are the apps installed?
|
||||
for i in kissattach kissparms
|
||||
do
|
||||
which $i >/dev/null
|
||||
[ $? -eq 0 ] && echo "$i found." || { echo >&2 "Error: $i required but not found. Aborting."; exit 1; }
|
||||
done
|
||||
CONFFILE="$(makeConfig ax25)"
|
||||
CMDS[direwolf]+=" -p -d u -c $CONFFILE"
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
echo
|
||||
echo "Starting ${CMDS[${ORDERS[$i]}]}"
|
||||
case "${ORDERS[$i]}" in
|
||||
direwolf)
|
||||
if ! grep -q "^$AX25PORT[[:space:]]" $AX25PORTFILE 2>/dev/null
|
||||
then
|
||||
echo -n "File $AX25PORTFILE empty or does not contain $AX25PORT. Adding..."
|
||||
echo "$AX25PORT $MYCALL 0 255 7 Winlink" | sudo tee --append $AX25PORTFILE
|
||||
echo "done."
|
||||
fi
|
||||
rm -f /tmp/kisstnc
|
||||
$SCREEN -c $SCREENCONFIG -L -d -m -S ${ORDERS[$i]} ${CMDS[${ORDERS[$i]}]}
|
||||
COUNTER=0
|
||||
MAXWAIT=8
|
||||
while [ $COUNTER -lt $MAXWAIT ]
|
||||
do
|
||||
# Allocate a PTY to ax25
|
||||
[ -L /tmp/kisstnc ] && break
|
||||
sleep 1
|
||||
let COUNTER=COUNTER+1
|
||||
done
|
||||
if [ $COUNTER -ge $MAXWAIT ]
|
||||
then
|
||||
echo >&2 "Direwolf failed to allocate a PTY! Aborting."
|
||||
echo >&2 "Is ADEVICE set to your sound card?"
|
||||
ctrl_c
|
||||
exit 1
|
||||
fi
|
||||
echo "Direwolf started."
|
||||
sudo $(which kissattach) $(readlink -f /tmp/kisstnc) $AX25PORT
|
||||
[ $? -eq 0 ] || { echo "kissattach failed. Aborting."; ctrl_c; exit 1; }
|
||||
KISSPARMS="-c 1 -p $AX25PORT -t $TXDelay -l $TXTail -s $Slottime -r $Persist -f n"
|
||||
echo "Setting $(which kissparms) $KISSPARMS"
|
||||
sleep 2
|
||||
sudo $(which kissparms) $KISSPARMS
|
||||
[ $? -eq 0 ] || { echo "kissparms settings failed. Aborting."; ctrl_c; exit 1; }
|
||||
;;
|
||||
*)
|
||||
$SCREEN -c $SCREENCONFIG -L -d -m -S ${ORDERS[$i]} ${CMDS[${ORDERS[$i]}]}
|
||||
;;
|
||||
esac
|
||||
echo "============================"
|
||||
done
|
||||
screen -list
|
||||
echo
|
||||
echo "------ ax25 Direwolf configuration file ------"
|
||||
cat $CONFFILE | grep -v "^$"
|
||||
echo "----------------------------------------------"
|
||||
sleep 2
|
||||
rm -f $CONFFILE
|
||||
if [[ $DMODE == "pat" && $GRID != "" ]]
|
||||
then
|
||||
if $WGET -q --tries=2 --timeout=5 --spider http://google.com
|
||||
then # There is an internet connection, so get local RMS list
|
||||
GRID="${GRID:0:4}"
|
||||
GRID="${GRID^^}"
|
||||
echo
|
||||
echo "RMS Stations in grid square $GRID:"
|
||||
$(which pat) rmslist | grep "${GRID}\|callsign" | sort -k 3,3 -n
|
||||
fi
|
||||
fi
|
||||
echo
|
||||
echo "Tailing $LOGFILE. All apps log to this file. Press Ctrl-C to quit all apps."
|
||||
echo
|
||||
tail -n 150 -F $LOGFILE
|
||||
;;
|
||||
digi*|igate)
|
||||
[[ $PTT0 == "" || $PTT0 =~ "GPIO" ]] && ORDERS=( direwolf ) || { checkSerial; ORDERS=( rigctld direwolf ); }
|
||||
# Check that the app is installed.
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
which ${ORDERS[$i]} >/dev/null
|
||||
[ $? -eq 0 ] && echo "${ORDERS[$i]} found." || { echo >&2 "${ORDERS[$i]} required but not found. Aborting."; exit 1; }
|
||||
# Kill existing session if it exists
|
||||
SCR="$($SCREEN -list | grep ${ORDERS[$i]} | tr -d ' \t' | cut -d'(' -f1 | tr -d '\n')"
|
||||
[[ "$SCR" != "" ]] && { pkill piardop2; $SCREEN -S $SCR -X quit; }
|
||||
#[[ "$SCR" != "" ]] && $SCREEN -S $SCR -X quit
|
||||
done
|
||||
CONFFILE="$(makeConfig $DMODE)"
|
||||
CMDS[direwolf]+=" -d t -c $CONFFILE"
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
echo
|
||||
echo "Starting ${CMDS[${ORDERS[$i]}]}"
|
||||
$SCREEN -c $SCREENCONFIG -L -d -m -S ${ORDERS[$i]} ${CMDS[${ORDERS[$i]}]}
|
||||
done
|
||||
screen -list
|
||||
echo
|
||||
echo "------ APRS $DMODE Direwolf configuration file ------"
|
||||
cat $CONFFILE | grep -v "^$"
|
||||
echo "-----------------------------------------------------"
|
||||
echo
|
||||
sleep 2
|
||||
rm -f $CONFFILE
|
||||
echo "Tailing $LOGFILE. All apps log to this file. Press Ctrl-C to quit all apps."
|
||||
echo
|
||||
tail -n 150 -F $LOGFILE
|
||||
;;
|
||||
*ardop*)
|
||||
case "$DMODE" in
|
||||
*pat*)
|
||||
ORDERS=( piardop2 pat )
|
||||
echo "NOTE: If you haven't already done so, you must run 'pat configure' or manually"
|
||||
echo " configure $HOME/.wl2k/config.json to use pat."
|
||||
echo
|
||||
CMDS[pat]="$(which pat) -l ardop,telnet http"
|
||||
;;
|
||||
*)
|
||||
ORDERS=( piardop2 )
|
||||
;;
|
||||
esac
|
||||
# Check that the app is installed, and kill it if it is already running.
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
which ${ORDERS[$i]} >/dev/null
|
||||
[ $? -eq 0 ] && echo "${ORDERS[$i]} found." || { echo >&2 "${ORDERS[$i]} required but not found. Aborting."; exit 1; }
|
||||
# Kill existing session if it exists
|
||||
SCR="$($SCREEN -list | grep ${ORDERS[$i]} | tr -d ' \t' | cut -d'(' -f1 | tr -d '\n')"
|
||||
[[ "$SCR" != "" ]] && $SCREEN -S $SCR -X quit
|
||||
done
|
||||
CMDS[piardop2]="$(which piardop2) $ARDOP_PORT $ARDOP_DEV"
|
||||
if [[ $ARDOP_PTT == "" ]]
|
||||
then
|
||||
echo >&2 "Error: Please set PTT type (variable ARDOP_PTT) for ARDOP in this script."
|
||||
exit 1
|
||||
else
|
||||
CMDS[piardop2]+=" $ARDOP_PTT"
|
||||
fi
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
echo
|
||||
echo "Starting ${CMDS[${ORDERS[$i]}]}"
|
||||
$SCREEN -c $SCREENCONFIG -L -d -m -S ${ORDERS[$i]} ${CMDS[${ORDERS[$i]}]}
|
||||
done
|
||||
echo "Tailing $LOGFILE. All apps log to this file. Press Ctrl-C to quit all apps."
|
||||
echo
|
||||
tail -n 150 -F $LOGFILE
|
||||
;;
|
||||
*)
|
||||
Usage
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
stop)
|
||||
ORDERS=( rigctld piardop2 direwolf pat )
|
||||
#ORDERS=( rigctld direwolf )
|
||||
echo
|
||||
for i in ${!ORDERS[@]}
|
||||
do
|
||||
SCR="$($SCREEN -list | grep ${ORDERS[$i]} | tr -d ' \t' | cut -d'(' -f1 | tr -d '\n')"
|
||||
if [[ "$SCR" != "" ]]
|
||||
then
|
||||
echo -n "Stopping $SCR..."
|
||||
$SCREEN -S $SCR -X quit
|
||||
echo "done."
|
||||
else
|
||||
echo "Stopping ${ORDERS[$i]}: ${ORDERS[$i]} not running"
|
||||
fi
|
||||
done
|
||||
pgrep piardop2 >/dev/null && kill -9 $(pgrep piardop2)
|
||||
KISSATTACHPID="$(pgrep kissattach)"
|
||||
if [[ $KISSATTACHPID != "" ]]
|
||||
then
|
||||
echo -n "Stopping kissattach..."
|
||||
sudo killall kissattach
|
||||
rm -f /tmp/kisstnc
|
||||
echo "done."
|
||||
fi
|
||||
rm -f /tmp/tnc*
|
||||
;;
|
||||
*)
|
||||
Usage
|
||||
;;
|
||||
esac
|
||||
|
||||
53
trim-fldigi-log.sh
Executable file
53
trim-fldigi-log.sh
Executable file
@ -0,0 +1,53 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.4"
|
||||
|
||||
#
|
||||
# This script removes log files from the $HOME/.fldigi* folder(s) and subfolders.
|
||||
# Files with "last modified" timestamps that are before the specified time
|
||||
# are deleted. Files that match *log*, except for file names containing 'logbook'
|
||||
# are examined.
|
||||
#
|
||||
# Parameter 1 is a date reference e.g. "10 days ago" or "1 hour ago"
|
||||
#
|
||||
# DO NOT run this script while Fldigi is running. Likewise,
|
||||
# DO NOT run this script using Fldigi's autostart feature. It must be run
|
||||
# prior to starting Fldigi. If you want to run it every time you start
|
||||
# Fldigi on a Raspberry Pi, change the File Properties
|
||||
# of the Fldigi menu item to run this script and then Fldigi as follows:
|
||||
#
|
||||
# Click on the Raspberry and navigate to the menu containing Fldigi. Right-click
|
||||
# on the Fldigi menu item, click Properties then select the "Desktop Entry" tab.
|
||||
# In the Command field, replace 'fldigi' with the following (change the
|
||||
# time period as desired):
|
||||
#
|
||||
# sh -c '/usr/local/bin/trim-fldigi-log.sh "1 week ago"';fldigi
|
||||
#
|
||||
# Leave the "Execute in Terminal" box unchecked, then click OK.
|
||||
#
|
||||
|
||||
DIRS="$HOME/.fldigi $HOME/.fldigi-left $HOME/.fldigi-right"
|
||||
|
||||
# Some error checking
|
||||
[[ $1 == "" ]] && { echo >&2 "Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""; exit 1; }
|
||||
|
||||
if ! date -u --date="$1" 1>/dev/null 2>&1
|
||||
then # Invalid date requested
|
||||
exit 1
|
||||
elif [[ ${1^^} != "NOW" && $(($(date -u --date="$1" +%s))) > $(($(date -u +%s))) ]]
|
||||
then # Date requested is in the future; invalid
|
||||
echo >&2 "Date requested is in the future."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
for D in $DIRS
|
||||
do
|
||||
for F in $(ls -R ${D}/*log* 2>/dev/null)
|
||||
do
|
||||
[ -e $F ] && [ -f "$F" ] && ! [[ $F =~ logbook ]] || continue
|
||||
STAMP="$(stat -c %Y $F)"
|
||||
[ $STAMP -lt $(date -u --date="$1" +%s) ] && rm -f $F
|
||||
done
|
||||
done
|
||||
|
||||
|
||||
56
trim-flmsg-log.sh
Executable file
56
trim-flmsg-log.sh
Executable file
@ -0,0 +1,56 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.5"
|
||||
|
||||
#
|
||||
# This script removes log files from the $HOME/.flmsg* folder(s) and subfolders.
|
||||
# Files with "last modified" timestamps that are before the specified time
|
||||
# are deleted. Files that match the elements of $SDIRS below are examined.
|
||||
#
|
||||
# Parameter 1 is a date reference e.g. "10 days ago" or "1 hour ago"
|
||||
#
|
||||
# DO NOT run this script while Flmsg is running. It must be run
|
||||
# prior to starting Flmsg. If you want to run it every time you start
|
||||
# Flmsg on a Raspberry Pi, change the File Properties
|
||||
# of the Flmsg menu item to run this script and then Flmsg as follows:
|
||||
#
|
||||
# Click on the Raspberry and navigate to the menu containing Flmsg. Right-click
|
||||
# on the Flmsg menu item, click Properties then select the "Desktop Entry" tab.
|
||||
# In the Command field, replace 'flmsg' with the following (change the
|
||||
# time period as desired):
|
||||
#
|
||||
# sh -c '/usr/local/bin/trim-flmsg-log.sh "1 week ago"';flmsg
|
||||
#
|
||||
# Leave the "Execute in Terminal" box unchecked, then click OK.
|
||||
#
|
||||
|
||||
|
||||
DIRS="$HOME/.nbems $HOME/.nbems-left $HOME/.nbems-right"
|
||||
SDIRS="/log_files/* /temp_files/* /ICS/*.htm /ICS/*.csv /ICS/messages/* /ICS/messages/archive/* /ICS/log_files/* /WRAP/auto/* /WRAP/recv/* /WRAP/send/* /TRANSFERS/* /FLAMP/*log* /FLAMP/rx/* /FLAMP/tx/* /ARQ/files/* /ARQ/mail/* /ARQ/recv/* /ARQ/send/*"
|
||||
|
||||
# Some error checking
|
||||
[[ $1 == "" ]] && { echo >&2 "Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""; exit 1; }
|
||||
|
||||
if ! date -u --date="$1" 1>/dev/null 2>&1
|
||||
then # Invalid date requested
|
||||
exit 1
|
||||
elif [[ ${1^^} != "NOW" && $(($(date -u --date="$1" +%s))) > $(($(date -u +%s))) ]]
|
||||
then # Date requested is in the future; invalid
|
||||
echo >&2 "Date requested is in the future."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
for D in $DIRS
|
||||
do
|
||||
for S in $SDIRS
|
||||
do
|
||||
for F in $(ls -R ${D}${S} 2>/dev/null)
|
||||
do
|
||||
[ -e "$F" ] && [ -f "$F" ] || continue
|
||||
STAMP="$(stat -c %Y $F)"
|
||||
[ $STAMP -lt $(date -u --date="$1" +%s) ] && rm -f $F
|
||||
done
|
||||
done
|
||||
done
|
||||
|
||||
|
||||
52
trim-flrig-log.sh
Executable file
52
trim-flrig-log.sh
Executable file
@ -0,0 +1,52 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.4"
|
||||
|
||||
# This script removes log files from the $HOME/.flrig* folder(s) and subfolders.
|
||||
# Files with "last modified" timestamps that are before the specified time
|
||||
# are deleted. Files that match *log*, except for file names containing 'logbook'
|
||||
# are examined.
|
||||
#
|
||||
# Parameter 1 is a date reference e.g. "10 days ago" or "1 hour ago"
|
||||
#
|
||||
# DO NOT run this script while Flrig is running. It must be run
|
||||
# prior to starting Flrig. If you want to run it every time you start
|
||||
# Flrig on a Raspberry Pi, change the File Properties
|
||||
# of the Flrig menu item to run this script and then Flrig as follows:
|
||||
#
|
||||
# Click on the Raspberry and navigate to the menu containing Flrig. Right-click
|
||||
# on the Flrig menu item, click Properties then select the "Desktop Entry" tab.
|
||||
# In the Command field, replace 'flrig' with the following (change the
|
||||
# time period as desired):
|
||||
#
|
||||
# sh -c '/usr/local/bin/trim-flrig-log.sh "1 week ago"';flrig
|
||||
#
|
||||
# Leave the "Execute in Terminal" box unchecked, then click OK.
|
||||
#
|
||||
|
||||
|
||||
DIRS="$HOME/.flrig $HOME/.flrig-left $HOME/.flrig-right"
|
||||
|
||||
# Some error checking
|
||||
[[ $1 == "" ]] && { echo >&2 "Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""; exit 1; }
|
||||
|
||||
if ! date -u --date="$1" 1>/dev/null 2>&1
|
||||
then # Invalid date requested
|
||||
exit 1
|
||||
elif [[ ${1^^} != "NOW" && $(($(date -u --date="$1" +%s))) > $(($(date -u +%s))) ]]
|
||||
then # Date requested is in the future; invalid
|
||||
echo >&2 "Date requested is in the future."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
for D in $DIRS
|
||||
do
|
||||
for F in $(ls -R ${D}/*txt* 2>/dev/null)
|
||||
do
|
||||
[ -e "$F" ] && [ -f "$F" ] || continue
|
||||
STAMP="$(stat -c %Y $F)"
|
||||
[ $STAMP -lt $(date -u --date="$1" +%s) ] && rm -f $F
|
||||
done
|
||||
done
|
||||
|
||||
|
||||
80
trim-fsq-audit.sh
Executable file
80
trim-fsq-audit.sh
Executable file
@ -0,0 +1,80 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.4"
|
||||
|
||||
# This script trims the fsq_audit_log.txt file
|
||||
# in the ~/.fldigi/temp folder by removing content added aded earlier
|
||||
# than the supplied time (e.g. "10 days ago" or "1 hour ago").
|
||||
#
|
||||
# Parameter 1 is a date reference e.g. "10 days ago" or "1 hour ago"
|
||||
#
|
||||
# DO NOT run this script while Fldigi is running. Likewise,
|
||||
# DO NOT run this script using Fldigi's autostart feature. It must be run
|
||||
# prior to starting Fldigi. If you want to run it every time you start
|
||||
# Fldigi on a Raspberry Pi, change the File Properties
|
||||
# of the Fldigi menu item to run this script and then Fldigi as follows:
|
||||
#
|
||||
# Click on the Raspberry and navigate to the menu containing Fldigi. Right-click
|
||||
# on the Fldigi menu item, click Properties then select the "Desktop Entry" tab.
|
||||
# In the Command field, replace 'fldigi' with the following (change the
|
||||
# time period as desired):
|
||||
#
|
||||
# sh -c '/usr/local/bin/trim-fsq-audit.sh "30 days ago"';fldigi
|
||||
#
|
||||
# Leave the "Execute in terminal" box unchecked, then click OK.
|
||||
#
|
||||
# If you want to run both this script and the trim-fsq-heard.sh script in the
|
||||
# same way, use this line in the Command field instead (change the time period
|
||||
# as desired):
|
||||
#
|
||||
# sh -c '/usr/local/bin/trim-fsq-audit.sh "30 days ago";/usr/local/bin/trim-fsq-heard.sh "1 hour ago"';fldigi
|
||||
#
|
||||
|
||||
|
||||
DIRS="$HOME/.fldigi/temp $HOME/.fldigi-left/temp $HOME/.fldigi-right/temp"
|
||||
|
||||
[[ $1 == "" ]] && { echo >&2 "Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""; exit 1; }
|
||||
|
||||
if ! date -u --date="$1" 1>/dev/null
|
||||
then # Invalid date requested
|
||||
echo >&2 "Invalid date requested. Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""
|
||||
exit 1
|
||||
elif [[ ${1^^} != "NOW" && $(($(date -u --date="$1" +%s))) > $(($(date -u +%s))) ]]
|
||||
then # Date requested is in the future; invalid
|
||||
echo >&2 "Date requested is in the future. No change to file."
|
||||
exit 1
|
||||
fi
|
||||
TARGET="$(date -u --date="$1" +"%s")"
|
||||
|
||||
for D in $DIRS
|
||||
do
|
||||
AUDIT="$D/fsq_audit_log.txt"
|
||||
|
||||
# Some error checking
|
||||
[ -e "$AUDIT" ] && [ -f "$AUDIT" ] && [ -s "$AUDIT" ] || continue # $AUDIT not found or empty
|
||||
|
||||
T="$(mktemp)"
|
||||
declare -i LINE=0
|
||||
while read -r ATAG1 ATAG2 DTAG TTAG REMAINDER
|
||||
do
|
||||
(( LINE++ ))
|
||||
if [[ "$ATAG1 $ATAG2" == "Audit log:" ]]
|
||||
then # Determine logged timestamp
|
||||
TTAG="$(echo $TTAG | tr -d ',')" # strip out comma
|
||||
DTAG="$(echo $DTAG | tr -d ',')" # strip out comma
|
||||
# convert to a time format that date command undertands
|
||||
TTAG="$(echo $TTAG | sed -E 's|([0-9]{2})([0-9]{2})([0-9]{2})|\1:\2:\3|')"
|
||||
STAMP="$(date -u -d"$DTAG $TTAG" +"%s")"
|
||||
if (( TARGET < STAMP ))
|
||||
then # Save everything after this $LINE in $AUDIT
|
||||
echo "==================================================" > $T
|
||||
tail -n +$LINE $AUDIT >> $T
|
||||
break
|
||||
fi
|
||||
fi
|
||||
done < $AUDIT
|
||||
mv $T $AUDIT
|
||||
chmod 644 $AUDIT
|
||||
done
|
||||
|
||||
|
||||
62
trim-fsq-heard.sh
Executable file
62
trim-fsq-heard.sh
Executable file
@ -0,0 +1,62 @@
|
||||
#!/bin/bash
|
||||
|
||||
VERSION="1.4"
|
||||
|
||||
# This script trims the fsq_heard_log.txt file
|
||||
# in the ~/.fldigi/temp folder by removing lines with timestamps earlier
|
||||
# than the supplied time (e.g. "10 days ago" or "1 hour ago").
|
||||
#
|
||||
# Parameter 1 is a date reference e.g. "10 days ago" or "1 hour ago"
|
||||
#
|
||||
# DO NOT run this script while Fldigi is running. Likewise,
|
||||
# DO NOT run this script using Fldigi's autostart feature. It must be run
|
||||
# prior to starting Fldigi. If you want to run it every time you start
|
||||
# Fldigi on a Raspberry Pi, change the File Properties
|
||||
# of the Fldigi menu item to run this script and then Fldigi as follows:
|
||||
#
|
||||
# Click on the Raspberry and navigate to the menu containing Fldigi. Right-click
|
||||
# on the Fldigi menu item, click Properties then select the "Desktop Entry" tab.
|
||||
# In the Command field, replace 'fldigi' with the following (change the
|
||||
# time period as desired):
|
||||
#
|
||||
# sh -c '/home/pi/trim-fsq-heard.sh "1 week ago"';fldigi
|
||||
#
|
||||
# Leave the "Execute in Terminal" box unchecked, then click OK.
|
||||
#
|
||||
# If you want to run both this script and the trim-fsq-audit.sh script in the
|
||||
# same way, use this line in the Command field instead (change the time period as
|
||||
# desired):
|
||||
#
|
||||
# sh -c '/usr/local/bin/trim-fsq-audit.sh "30 days ago";/usr/local/bin/trim-fsq-heard.sh "1 week ago"';fldigi
|
||||
#
|
||||
|
||||
|
||||
DIRS="$HOME/.fldigi/temp $HOME/.fldigi-left/temp $HOME/.fldigi-right/temp"
|
||||
|
||||
[[ $1 == "" ]] && { echo >&2 "Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""; exit 1; }
|
||||
if ! date -u --date="$1" 1>/dev/null
|
||||
then # Invalid date requested
|
||||
echo >&2 "Invalid date requested. Supply a date reference, e.g. \"10 days ago\" or \"1 hour ago\""
|
||||
exit 1
|
||||
elif [[ ${1^^} != "NOW" && $(($(date -u --date="$1" +%s))) > $(($(date -u +%s))) ]]
|
||||
then # Date requested is in the future; invalid
|
||||
echo >&2 "Date requested is in the future. No changes made."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
for D in $DIRS
|
||||
do
|
||||
HEARD="$D/fsq_heard_log.txt"
|
||||
[ -e "$HEARD" ] && [ -f "$HEARD" ] && [ -s "$HEARD" ] || continue # $HEARD not found or empty
|
||||
T="$(mktemp)"
|
||||
cat > $T << EOF
|
||||
==================================================
|
||||
Heard log: $(date -u --date="$1" "+%Y%m%d, %H%M%S")
|
||||
==================================================
|
||||
EOF
|
||||
awk -v d=$(date -u --date="$1" "+%Y%m%d,%H%M%S") '($1 "," $2) > d' $HEARD | grep -v "^Heard\|^===" >> $T
|
||||
mv $T $HEARD
|
||||
chmod 644 $HEARD
|
||||
done
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user