maiana/latest/Firmware

Transponder firmware

This is a vanilla Eclipse CDT project. Import it into your workspace and (assuming you have ARM cross compiler installed) it should be straightforward.

The application is mainly interrupt driven, with a single event queue being dispatched by either main() or an RTOS task.

Key updates

• Starting with board 6.1 you have the option of using FreeRTOS 10, but not by default
• DFU can be achieved by jumping directly into the ROM bootloader, so there is no need for hardware to manipulate the BOOT0 pin
• The TX_DISABLE signal is now supported. It is active low in board 9.x and active high in board 10.x
• Board 9.3 adds 3 "status" (LED driving) signals for GPS, RX and TX
• Board 10.x needed a GPIO swap to make routing viable and inverted the logic of the TX_DISABLE signal
• The new 'cli' command was introduced to reboot the board into 'quiet' mode, making a lot easier to program and verify the station data