>VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE D S G Dual N-Channel MOSFET Frames for Sheet and Layout >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: FRAME DIN A4, landscape with location and doc. field Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >Name >Value From: http://www.niccomp.com/catalog/npis_ls.pdf >Name >Value >Name >Value >NAME >VALUE 1007 (2518 metric) package >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE 1.3x1.3mm 1.7mm between. Fits Sumida CDRH2D09, CDRH2D18 inductor >NAME >VALUE >NAME >VALUE >Name >Value >Name >Value For Coiltronics/Cooper DR1030 series inductors >NAME >VALUE 1W Resistor, 0.6" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value >Value >Name >NAME >VALUE Footprint for Bourns SDR0403 family inductors >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value RESISTOR chip >NAME >VALUE >NAME >VALUE 1/6W Thru-hole Resistor - *UNPROVEN* >NAME >VALUE >NAME >VALUE 1/4W Resistor, 0.4" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1/2W Resistor, 0.5" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 2W Resistor, 0.8" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value <h3>AXIAL-0.3-KIT</h3> Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value This is the "EZ" version of the standard .3" spaced resistor package. It has a reduced top mask to make it harder to install upside-down. >Name >Value >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE >NAME >VALUE >NAME >VALUE Inductors Basic Inductor/Choke - 0603 and 1206. Footprints are not proven and vary greatly between part numbers. INDUCTOR POWER 3.3UH 4.0A SMD 0.197" L x 0.197" W x 0.177" H (5.00mm x 5.00mm x 4.50mm) Resistor Basic schematic elements and footprints for 0603, 1206, and PTH resistors. <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >Name >Value >Name >Value >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF >NAME >VALUE <h3>CAP-PTH-SMALL-KIT</h3> Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571). Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. This is the "EZ" version of the .1" spaced ceramic thru-hole cap. It has reduced top mask to make it harder to put the component on the wrong side of the board. >Name >Value CAPACITOR chip >NAME >VALUE >NAME >VALUE Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Diode Basic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140 >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE >Name >Value Diode Basic small signal diode good up to 200mA. SMB footprint. Common part #: BAS16 >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE SMC Sized Diode >NAME >VALUE >Name >Value >Name >Value 100V/150mA 1N4148 - Super Cheap >NAME >VALUE >NAME >VALUE Diode These are standard reverse protection diodes and small signal diodes. SMA package can handle up to about 1A. SOD-323 can handle about 200mA. What the SOD-323 package when ordering, there are some mfgs out there that are 5-pin packages. <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >VALUE SUPPLY SYMBOL <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find drivers, regulators, and amplifiers. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Small Outline Transistor >NAME >VALUE >NAME >VALUE >NAME >VALUE Voltage Regulator LDO Standard 150mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5205. BP (by-pass) pin is used to lower output noise with 470pF cap. >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE >NAME >VALUE >VALUE >NAME >NAME >VALUE Standalone GNSS module >NAME >VALUE Telit SE873 GNSS Receiver Johanson Technology, Inc. Filters www.johansontechnology.com <author>Created by librarian@cadsoft.de</author> >NAME >VALUE SMD Ceramic GNSS Antenna <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find connectors and sockets- basically anything that can be plugged into or onto. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. SMA Antenna Connector This is a footprint for an edge mount RF antenna. Works pretty well with SMA type connectors but may also work with other edge mount RF connectors. Keep in mind, these edge mount connectors assume you are using a 0.062" PCB thickness. >NAME >VALUE Header for OS4000-T >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE No outline in silkscreen >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >VALUE >NAME >Name >Value Org Blu Brn W/Grn Grn SMA Antenna Connector End launch SMA connector. The paste layer has been removed so that the connector can be hand soldered onto the board after reflow. Header 5 Standard 5-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08230 with associated crimp pins and housings. RJ45 Jack Simple RJ45, 8-pin connection - connector for common Cat5, Cat5e, and Cat6 Ethernet cables. Footprint not yet proven in production. Connector sku is PRT-00643; Breakout PCB sku is BOB-00716. >NAME >VALUE Multilayer SMD >VALUE >NAME RESISTOR chip >NAME >VALUE >NAME >VALUE Gnd >VALUE >NAME Classic 4-pin 3.2 x 2.5mm crystal PTC fuses, resettable thermistors Test Pins/Pads Cream on SMD OFF. new: Attribute TP_SIGNAL_NAME <author>Created by librarian@cadsoft.de</author> TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME TEST PAD >NAME >VALUE >TP_SIGNAL_NAME >NAME >TP_SIGNAL_NAME Test pad >NAME >NAME >NAME >VALUE >NAME 100µF 16V Aluminum Electrolytic Capacitors Radial, Can - SMD 2000 Hrs @ 85°C <a href="https://snapeda.com/parts/UWX1C101MCL1GB/Nichicon/view-part/?ref=eda">Check prices</a> >NAME >NAME >NAME >NAME >NAME >NAME >VALUE >NAME >VALUE Standard SMD inductor Standard SMD capacitor >NAME >VALUE >NAME >VALUE 1KB I2C EEPROM >NAME >NAME >VALUE Miniature tactile switch, 4-lead SMD >NAME >VALUE >NAME >VALUE Low Noise Adjustable LDO (1A max) >NAME >VALUE >NAME >VALUE SP2T RF Switch Connections & Power MCU Bandpass Filter RF Backend RF Power Amplifier GNSS Antenna Switch Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.