From d0717b9700fe9c2880da4e5d588ace02b71ea64d Mon Sep 17 00:00:00 2001 From: Peter Antypas Date: Tue, 28 Sep 2021 08:21:21 -0700 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 4ce39c0..a551562 100644 --- a/README.md +++ b/README.md @@ -23,7 +23,7 @@ The antenna casing that you see in these photos is a piece of 1" Schedule 40 "fu The VHF antenna whip is built using an epoxy wound filament tube coated with high grade US-made irradiated polyolefin ("heat shrink") tubing. The company that makes this tubing (and helped me with this design challenge) also built the landing gear for NASA's Ingenuity helicopter, currently flying on Mars. They definitely understand how to deal with harsh environments. The bottomline is that unlike typical fiberglass antenna masts you might see around (or have on your boat already), this antenna is not going to degrade and "blossom" under continuous sun exposure. -The entire outdoor assembly is held together by the same high grade heat shrink tubing. The main water seal is formed by heat shrinking the tube around a specially designed 3D printed cap made of PLA. This part naturally softens when heated, and because it is compressed by the heat shrink tubing, it forms a permanent, tight colar around the antenna tube. A layer of clear heat shrink in the interior forms a secondary water seal encompassing the lower part of the antenna and the PCB. +The entire outdoor assembly is held together by the same high grade heat shrink tubing. The main water seal is formed by heat shrinking the tube around a specially designed 3D printed cap made of PLA. This part naturally softens when heated, and because it is compressed by the heat shrink tubing, it forms a permanent, tight colar around the antenna tube. A layer of clear heat shrink in the interior forms a secondary water seal encompassing the lower part of the antenna. The unit can be opened and serviced by (carefully) cutting through the heat shrink tubing with a knife, then resealing with the same material and method as before.