diff --git a/latest/Firmware/README.md b/latest/Firmware/README.md
index bae4791..a7b9a7b 100644
--- a/latest/Firmware/README.md
+++ b/latest/Firmware/README.md
@@ -6,10 +6,11 @@ The application is mainly interrupt driven, with a single event queue being disp
 
 ### Key updates
 
- - Starting with board 6.1 you have the option of using FreeRTOS 10, but not by default
+ - It turned out that FreeRTOS added no value, so it was removed
  - DFU can be achieved by jumping directly into the ROM bootloader, so there is no need for hardware to manipulate the BOOT0 pin
  - The TX_DISABLE signal is now supported. It is active low in board 9.x and active high in board 10.x 
  - Board 9.3 adds 3 "status" (LED driving) signals for GPS, RX and TX
- - Board 10.x needed a GPIO swap to make routing viable and inverted the logic of the TX_DISABLE signal
+ - Board 10.x needed a GPIO swap to make routing viable and inverted the logic of the TX_DISABLE signal. 
  - The new 'cli' command was introduced to reboot the board into 'quiet' mode, making a lot easier to program and verify the station data
+ - Station metadata is now stored in MCU flash, so it is now handled in the Configuration class instead of the BSP layer. The EEPROM is obsolete.