v/maiana
1
0
Fork 0
mirror of https://github.com/peterantypas/maiana.git synced 2025-05-28 05:10:40 -07:00
Code Issues Projects Releases Wiki Activity

Merge branch 'master' of github.com:peterantypas/maiana

Browse Source
This commit is contained in:
Peter Antypas 2021-01-30 12:19:17 -08:00
commit 4613466268
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
latest/Firmware/README.md
View File

@ -6,10 +6,11 @@ The application is mainly interrupt driven, with a single event queue being disp
### Key updates
- Starting with board 6.1 you have the option of using FreeRTOS 10, but not by default
- It turned out that FreeRTOS added no value, so it was removed
- DFU can be achieved by jumping directly into the ROM bootloader, so there is no need for hardware to manipulate the BOOT0 pin
- The TX_DISABLE signal is now supported. It is active low in board 9.x and active high in board 10.x
- Board 9.3 adds 3 "status" (LED driving) signals for GPS, RX and TX
- Board 10.x needed a GPIO swap to make routing viable and inverted the logic of the TX_DISABLE signal
- The new 'cli' command was introduced to reboot the board into 'quiet' mode, making a lot easier to program and verify the station data
- Board 10.x needed a GPIO swap to make routing viable and inverted the logic of the TX_DISABLE signal, but it's all abstracted in the BSP
- The new 'cli' command was introduced to reboot the board into 'quiet' mode, making it a lot easier to program and verify the station data
- Station metadata is now stored in MCU flash, so it is handled in the Configuration class instead of the BSP. The EEPROM is obsolete.