mirror of
https://github.com/NaitLee/Cat-Printer.git
synced 2025-05-15 23:00:15 -07:00
158 lines
6.0 KiB
Python
158 lines
6.0 KiB
Python
'''
|
|
Cat-Printer Commander, way to communicate with cat printers via bluetooth
|
|
|
|
No rights reserved.
|
|
License CC0-1.0-only: https://directory.fsf.org/wiki/License:CC0
|
|
'''
|
|
|
|
from abc import ABCMeta, abstractmethod
|
|
|
|
crc8_table = [
|
|
0x00, 0x07, 0x0e, 0x09, 0x1c, 0x1b, 0x12, 0x15, 0x38, 0x3f, 0x36, 0x31,
|
|
0x24, 0x23, 0x2a, 0x2d, 0x70, 0x77, 0x7e, 0x79, 0x6c, 0x6b, 0x62, 0x65,
|
|
0x48, 0x4f, 0x46, 0x41, 0x54, 0x53, 0x5a, 0x5d, 0xe0, 0xe7, 0xee, 0xe9,
|
|
0xfc, 0xfb, 0xf2, 0xf5, 0xd8, 0xdf, 0xd6, 0xd1, 0xc4, 0xc3, 0xca, 0xcd,
|
|
0x90, 0x97, 0x9e, 0x99, 0x8c, 0x8b, 0x82, 0x85, 0xa8, 0xaf, 0xa6, 0xa1,
|
|
0xb4, 0xb3, 0xba, 0xbd, 0xc7, 0xc0, 0xc9, 0xce, 0xdb, 0xdc, 0xd5, 0xd2,
|
|
0xff, 0xf8, 0xf1, 0xf6, 0xe3, 0xe4, 0xed, 0xea, 0xb7, 0xb0, 0xb9, 0xbe,
|
|
0xab, 0xac, 0xa5, 0xa2, 0x8f, 0x88, 0x81, 0x86, 0x93, 0x94, 0x9d, 0x9a,
|
|
0x27, 0x20, 0x29, 0x2e, 0x3b, 0x3c, 0x35, 0x32, 0x1f, 0x18, 0x11, 0x16,
|
|
0x03, 0x04, 0x0d, 0x0a, 0x57, 0x50, 0x59, 0x5e, 0x4b, 0x4c, 0x45, 0x42,
|
|
0x6f, 0x68, 0x61, 0x66, 0x73, 0x74, 0x7d, 0x7a, 0x89, 0x8e, 0x87, 0x80,
|
|
0x95, 0x92, 0x9b, 0x9c, 0xb1, 0xb6, 0xbf, 0xb8, 0xad, 0xaa, 0xa3, 0xa4,
|
|
0xf9, 0xfe, 0xf7, 0xf0, 0xe5, 0xe2, 0xeb, 0xec, 0xc1, 0xc6, 0xcf, 0xc8,
|
|
0xdd, 0xda, 0xd3, 0xd4, 0x69, 0x6e, 0x67, 0x60, 0x75, 0x72, 0x7b, 0x7c,
|
|
0x51, 0x56, 0x5f, 0x58, 0x4d, 0x4a, 0x43, 0x44, 0x19, 0x1e, 0x17, 0x10,
|
|
0x05, 0x02, 0x0b, 0x0c, 0x21, 0x26, 0x2f, 0x28, 0x3d, 0x3a, 0x33, 0x34,
|
|
0x4e, 0x49, 0x40, 0x47, 0x52, 0x55, 0x5c, 0x5b, 0x76, 0x71, 0x78, 0x7f,
|
|
0x6a, 0x6d, 0x64, 0x63, 0x3e, 0x39, 0x30, 0x37, 0x22, 0x25, 0x2c, 0x2b,
|
|
0x06, 0x01, 0x08, 0x0f, 0x1a, 0x1d, 0x14, 0x13, 0xae, 0xa9, 0xa0, 0xa7,
|
|
0xb2, 0xb5, 0xbc, 0xbb, 0x96, 0x91, 0x98, 0x9f, 0x8a, 0x8d, 0x84, 0x83,
|
|
0xde, 0xd9, 0xd0, 0xd7, 0xc2, 0xc5, 0xcc, 0xcb, 0xe6, 0xe1, 0xe8, 0xef,
|
|
0xfa, 0xfd, 0xf4, 0xf3
|
|
]
|
|
|
|
def crc8(data):
|
|
'crc8 checksum'
|
|
crc = 0
|
|
for byte in data:
|
|
crc = crc8_table[(crc ^ byte) & 0xff]
|
|
return crc & 0xff
|
|
|
|
def reverse_bits(i: int):
|
|
'Reverse the bits of this byte (as `int`)'
|
|
return (
|
|
(i & 0b10000000) >> 7 |
|
|
(i & 0b01000000) >> 5 |
|
|
(i & 0b00100000) >> 3 |
|
|
(i & 0b00010000) >> 1 |
|
|
(i & 0b00001000) << 1 |
|
|
(i & 0b00000100) << 3 |
|
|
(i & 0b00000010) << 5 |
|
|
(i & 0b00000001) << 7
|
|
)
|
|
|
|
def int_to_bytes(i: int, big_endian=False):
|
|
''' Turn `int` into `bytearray`, that have
|
|
least bytes possible to represent the int
|
|
'''
|
|
result = bytearray()
|
|
while i != 0:
|
|
result.append(i & 0xff)
|
|
i >>= 8
|
|
if big_endian:
|
|
result.reverse()
|
|
return result
|
|
|
|
class Commander(metaclass=ABCMeta):
|
|
'Semi-abstract class, to be inherited by `PrinterDriver`'
|
|
|
|
dry_run: bool = False
|
|
|
|
def make_command(self, command_bit, payload: bytearray, *,
|
|
prefix=bytearray(), suffix=bytearray()):
|
|
'Make bytes that to be used to control printer'
|
|
payload_size = len(payload)
|
|
if payload_size > 0xff:
|
|
raise ValueError(f'Command payload too big ({payload_size} > 255)')
|
|
return prefix + bytearray(
|
|
[ 0x51, 0x78, command_bit, 0x00, payload_size, 0x00 ]
|
|
) + payload + bytearray( [ crc8(payload), 0xff ] ) + suffix
|
|
|
|
def start_printing(self):
|
|
'Start printing'
|
|
self.send( bytearray([0x51, 0x78, 0xa3, 0x00, 0x01, 0x00, 0x00, 0x00, 0xff]) )
|
|
|
|
def start_printing_new(self):
|
|
'Start printing on newer printers'
|
|
self.send( bytearray([0x12, 0x51, 0x78, 0xa3, 0x00, 0x01, 0x00, 0x00, 0x00, 0xff]) )
|
|
|
|
def apply_energy(self):
|
|
''' Apply previously set energy to printer
|
|
'''
|
|
self.send( self.make_command(0xbe, int_to_bytes(0x01)) )
|
|
|
|
def get_device_state(self):
|
|
'(unknown). seems it could refresh device state & apply config'
|
|
self.send( self.make_command(0xa3, int_to_bytes(0x00)) )
|
|
|
|
def get_device_info(self):
|
|
'(unknown). seems it could refresh device state & apply config'
|
|
self.send( self.make_command(0xa8, int_to_bytes(0x00)) )
|
|
|
|
def update_device(self):
|
|
'(unknown). seems it could refresh device state & apply config'
|
|
self.send( self.make_command(0xa9, int_to_bytes(0x00)) )
|
|
|
|
def set_dpi_as_200(self):
|
|
'(unknown)'
|
|
self.send( self.make_command(0xa4, int_to_bytes(50)) )
|
|
|
|
def start_lattice(self):
|
|
'Mark the start of printing'
|
|
self.send( self.make_command(0xa6, bytearray(
|
|
[0xaa, 0x55, 0x17, 0x38, 0x44, 0x5f, 0x5f, 0x5f, 0x44, 0x38, 0x2c]
|
|
)) )
|
|
|
|
def end_lattice(self):
|
|
'Mark the end of printing'
|
|
self.send( self.make_command(0xa6, bytearray(
|
|
[ 0xaa, 0x55, 0x17, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17 ]
|
|
)) )
|
|
|
|
def retract_paper(self, pixels: int):
|
|
'Retract the paper for some pixels'
|
|
self.send( self.make_command(0xa0, int_to_bytes(pixels)) )
|
|
|
|
def feed_paper(self, pixels: int):
|
|
'Feed the paper for some pixels'
|
|
self.send( self.make_command(0xa1, int_to_bytes(pixels)) )
|
|
|
|
def set_speed(self, value: int):
|
|
''' Set how quick to feed/retract paper. **The lower, the quicker.**
|
|
My printer with value < 4 set would make it unable to feed/retract,
|
|
maybe it's way too quick.
|
|
Speed also affects the quality, for heat time/stability reasons.
|
|
'''
|
|
self.send( self.make_command(0xbd, int_to_bytes(value)) )
|
|
|
|
def set_energy(self, amount: int):
|
|
''' Set thermal energy, max to `0xffff`
|
|
By default, it's seems around `0x3000` (1 / 5)
|
|
'''
|
|
self.send( self.make_command(0xaf, int_to_bytes(amount)) )
|
|
|
|
def draw_bitmap(self, bitmap_data: bytearray):
|
|
'Print `bitmap_data`. Also does the bit-reversing job.'
|
|
data = bytearray( map(reverse_bits, bitmap_data) )
|
|
self.send( self.make_command(0xa2, data) )
|
|
|
|
def draw_compressed_bitmap(self, bitmap_data: bytearray):
|
|
'TODO. Print `bitmap_data`, compress if worthy so'
|
|
self.draw_bitmap(bitmap_data)
|
|
|
|
@abstractmethod
|
|
def send(self, data):
|
|
'Send data to device, or whatever'
|
|
...
|